User Manual

98
Section 5 SETTING ADDITIONAL FUNCTIONS
ZFV-C
User’s Manual
Section 5
Setting the System Environment
Setting/Cancelling the Eco Mode
Whether or not to darken the screen when a preset time has passed without any opera-
tion.
We recommend setting this mode to [ON] to prevent the brightness of the LCD screen
from being impaired.
X MENU mode-[SYS1]-[ECO MODE]
Changing Image Capture Timing on Teaching Screen
Select status of image to be displayed on the teaching screen.
X MENU mode-[SYS2]-[TEACH IMAGE]
Setting Details
ON (default) Sets the Eco mode.
The screen darkens when three minutes continue without any operation.
OFF Cancels the Eco mode setting.
Setting Description
THROUGH (default) The latest image taken by the Sensor Head is displayed directly.
FREEZE Freeze the image and display.
The still image is displayed when the TRIG signal is input.
When amplifier units are gang-mounted, set all amplifier units to the
teaching screen then input the TRIG signal to the amplifier unit (furthest
to the right) where the sensor head is connected.
TRIG signal
TRIG signal
TRIG signal
Images are not loaded to all ampli-
fier units when the amplifier where
the sensor head is connected is not
set to the teaching screen.
Images are not loaded to the far left
amplifier when the far left amplifier
is not at the teaching screen.
Images are loaded to all amplifier
units when all amplifier units are
set to the teaching screen.