Datasheet

4
Z
Minimum Order Lot
The following models are available at the minimum order lot specified below.
Orders must be placed per lot.
Split-contact Models
*1. : Solder terminal : Screw terminal
*2. The pin plungers of reverse-type models are continuously pressed by the
actuator levers with compression coil springs and the pin plungers are freed
by operating the levers. Reverse-type models are highly vibration- and
shock-resistive because the pin plungers are normally pressed.
Maintained-contact Models
Classification
Standard High-sensitivity
Minimum
order lot (pcs)
Actuator
Short spring plunger
Z-15GD-B ---
10
Panel mount plunger
Z-15GQ
Z-15GQ-B
Z-15GQ8-B
---
Panel mount roller plunger
Z-15GQ22
Z-15GQ22-B
---
Panel mount cross roller
plunger
Z-15GQ21-B ---
Short hinge lever
Z-15GW21-B ---
Hinge lever
Z-15GW
Z-15GW-B
---
Low-force hinge lever
Z-15GW4-B Z-15HW24-B
Low-force hinge wire lever
--- Z-15HW78-B
Short hinge roller lever
Z-15GW22
Z-15GW22-B
---
Hinge roller lever
Z-15GW2
Z-15GW2-B
---
Reverse short hinge roller
lever
Z-15GM22-B ---
Reverse hinge roller lever
Z-15GM2-B ---
Contact gap F (1.0 mm)
Actuator Terminal * 1 Model
Pin plunger
---
Z-10FY-B
Slim spring plunger
---
Z-10FSY-B
Short spring plunger
---
Z-10FDY-B
Panel mount plunger
---
Z-10FQY-B
Panel mount roller
plunger
---
Z-10FQ22Y-B
Hinge lever
---
Z-10FWY-B
Short hinge roller
lever
---
Z-10FW22Y-B
Hinge roller lever
---
Z-10FW2Y-B
Reverse short hinge
roller lever
* 2
---
Z-10FM22Y-B
Actuator Model
Pin plunger
Z-15ER
Slim spring plunger
Z-15ESR
Hinge lever
Z-15EWR