Datasheet

ManualsBrandsOmron Industrial Automation ManualsMiscellaneous Sensor AccessoriesPlastic Mounting Bracket for Proximity Sensors

Proximity Sensor Accessories Y92E 1

Proximity Sensor Accessories

Y92E

Proximity Sensor Accessories to Mount,

Protect and Optimize Sensor Efficiency

• General purpose plastic mounting brackets

• Spring mount threaded cylindrical housings in anodized alu-

minum and stainless steel to reduce sensor damage due to

collisions

• Spring mount blocks in anodized aluminum or stainless steel

• Fast mount cylindrical tubes in nickel-plated brass and Fluo-

roplastic coated versions simplifies mounting and eliminates

sensor positioning

• Fluoroplastic sensor caps and ceramic face discs protect

sensor face from heat and abrasion

• Threaded metal block mounts

• Flat and right angle brackets in CRS or stainless steel fixed

or adjustable versions

• Weld jacket for cable and cordset protection

■ General Purpose Plastic Mounting Brackets

Ordering Information

Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.

Description Applicable sensor series Model

Fits 3.5 mm dia. unthreaded sensor E2C-C (Stainless Bracket)

Y92E-F3R5

Fits M5 size sensors E2C-C (Stainless Bracket)

Y92E-F5R4

Fits M8 size sensors E2E, E2A, E2F, E2C-T, E2C, E2C-H, E3HT

Y92E-B8

Fits M12 size sensors E2E, E2E2, E2A, E2F, E2C, E2EC, E2K-X, E2FQ, E2EQ, E2C-H, E2EV

Y92E-B12

Fits M18 size sensors E2E, E2E2, E2A, E2F, E2C, E2K-X, E2KQ, E2FQ, E2EQ, E2ES, E2C-H,

E2EV, E2EY, E2EZ, F92A, E3F2

Y92E-B18

Fits M30 size sensors E2E, E2E2, E2A, E2F, E2C, E2K-X, E2FQ, E2EQ, E2ES, E2EV, E2EY,

E2EZ, B7AP

Y92E-B30

Summary of content (22 pages)

PAGE 1
Proximity Sensor Accessories Y92E Proximity Sensor Accessories to Mount, Protect and Optimize Sensor Efficiency • General purpose plastic mounting brackets • Spring mount threaded cylindrical housings in anodized aluminum and stainless steel to reduce sensor damage due to collisions • Spring mount blocks in anodized aluminum or stainless steel • Fast mount cylindrical tubes in nickel-plated brass and Fluoroplastic coated versions simplifies mounting and eliminates sensor positioning • Fluoroplastic sensor
PAGE 2
Dimensions Unit: mm (inch) Mounting Brackets Drawing dimensions A Model B max. C D dia. E max. F 18±0.2 (0.71±.0.01) 10 (0.39) 18 (0.71) 8 (0.31) 28 (1.10) M4 x 20 bolt 24±0.2 (0.94±.0.01) 12.5 (0.49) 20 (0.79) 12 (0.47) 37 (1.46) M4 x 25 bolt Y92E-B12 32±0.2 (1.26±.0.01) 17 (0.67) 30 (1.18) 18 (0.71) 47 (1.85) M5 x 32 bolt Y92E-B18 45±0.2 (1.77±.0.01) 17 (0.67) 50 (1.97) 30 (1.18) 60 (2.
PAGE 3
■ Replacement Mounting Hardware (2 Locknuts and 1 Washer) Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 4
■ Proximity Sensor Spring Mount Threaded Housings Acts as a shock absorber Build compliance into your sensor mounting brackets to eliminate sensor damage due to target and tooling collisions. Spring mount threaded housings offer over-travel protection, resistance to abrasion, quicker installation and spare parts reduction. Spring mount threaded housings are available in anodized aluminum construction or in stainless steel versions for M8, M12, M18 and M30 shielded or unshielded proximity sensors.
PAGE 5
Dimensions Unit: mm (inch) Spring Mount Threaded Housings Model numbers ending in "U" are unshielded type and are depicted on the right. "O" dimension in the table is total allowable over travel. Stainless Steel version dimensions are identical. Unshielded Shielded A B C D E F G H I J 0 M8x1 M16 x1.5 3.1 (0.12) 0.25 (0.01) 22.1 (0.87) 15.1 (0.59) 5.1 (0.20) 22.1 (0.87) N/A N/A Y92E-GS08 9.51 (0.37) 11 (0.43) 9.04 (0.35) M22 x1.5 4.06 (0.16) 0.51 (0.02) 28.6 (1.12) 22.9 (0.
PAGE 6
■ Proximity Sensor Spring Mount Blocks Unshielded Models Shielded Models Offers the same protection as the threaded housings, available in anodized aluminum for M12, M18 and M30 shielded or unshielded proximity sensors. Plastic beveled end caps are included. Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 7
■ Replacement Beveled Plastic End Caps for Use with Spring Mounts Replacement beveled plastic end caps only are available for spring mount threaded and block style housings. Please determine the Prox. Barrel size and if it is shielded or unshielded type. Shielded types are glass filled Nylon, unshielded types are Delrin®. Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 8
■ Fast Mount Tubes, Fluoroplastic Coated Fast Mount Tubes and Fluoroplastic Resin Caps for Proximity Sensors Install proximity sensors into the tube and simply twist to secure. Maintains sensing gap, reduces installation time. Standard versions are nickelplated brass, Fluoroplastic coated versions protect the sensor from the harshest environments. Fluoroplastic resin end caps for fast mount tubes are also listed below.
PAGE 9
Dimensions Unit: mm (inch) Fast Mount Tubes A B C D E F 8.18 (0.32) 32.4 (1.28) 17.5 (0.69) M12x1 3.85 (0.15) 16.9 (0.67) 48.0 (1.93) 34.0 (1.34) 33.7 (1.34) 19.5 (0.77) 44.8 (1.76) 30.0 (1.18) 38.5 (1.52) 20.0 (0.79) 58.0 (2.28) 40.0 (1.57) 35.0 (1.50) 20.0 (0.79) 58.0 (2.28) 40.0 (1.57) 12.1 (0.48) 18.1 (0.71) 30.1 (1.19) Model Y92E-G08S Y92E-G08L M16x1 4.01 (0.16) 21.8 (0.86) Y92E-G12S Y92E-G12L M24x1.5 4.95 (0.19) 30.0 (1.18) Y92E-G18S Y92E-G18L M36x1.5 6.13 (0.
PAGE 10
■ Sensor Caps Standard Versions in Fluoroplastic or Ceramic (not for use with fast mount tubes) Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 11
■ Sensor Caps Standard Versions Polyallylate Resin (not for use with fast mount tubes) Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 12
■ Silicone Rubber Protective Covers Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery. Barrel size Description Model M12 Silicone Rubber Protective Cover for M12 Prox Y92E-E12-2 M18 Silicone Rubber Protective Cover for M18 Prox Y92E-E18-2 M30 Silicone Rubber Protective Cover for M30 Prox Y92E-E30-2 Dimensions Unit: mm (inch) Dimensions Model A dia. B dia. C D 11.0 (0.43) 14.0 (0.55) 5.0 (0.20) 1.0 (0.04) Y92E-E12-2 17.0 (0.
PAGE 13
■ Flat and Right Angle Mounting Brackets Brackets are available in fixed or slotted (adjustable) versions. Fixed Fixed Adjustable Adjustable Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 14
Flat Bracket Slotted (Adjustable) Hole Mounting; Material is Zinc-plated carbon steel. A B C D E F G H I Material thickness 8.10 (.319) 54.3 (2.14) 31.7 (1.25) 5.60 (.220) 15.9 (.625) 7.14 (.281) 19.0 (.749) 38.7 (1.52) 46.2 (1.82) 1.78 (.070) 12.1 (.476) 69.9 (2.75) 38.1 (1.50) 19.1 (.750) 7.92 (.312) 22.2 (.875) 45.7 (1.80) 58.4 (2.30) Y92E-B12FRAS 18.1 (.713) 82.6 (3.25) 44.5 (1.75) 25.4 (1.00) 50.8 (2.00) 66.7 (2.63) Y92E-B18FRAS 30.1 (1.18) 105 (4.11) 57.2 (2.
PAGE 15
Right Angle Bracket Slotted (Adjustable) Hole Mounting; Material is Zinc-plated carbon steel. A B C D E F G H I J K Material thickness 8.1 (.319) 25.4 (1.00) 31.8 (1.25) 5.54 (.218) 15.9 (.625) 7.14 (.281) 19 (.749) 31.8 (1.25) 9.83 (.387) 7.62 (.300) 7.95 (.313) 1.78 (.070) 12.1 (.476) 38.1 (1.50) 38.1 (1.50) 19.1 (.750) 7.92 (.312) 22.2 (.875) 34.8 (1.37) 14.0 (.550) 12.7 (.500) 11.4 (.450) Y92E-B12RAS 18.1 (.713) 50.8 (2.00) 44.5 (1.75) 25.4 (1.00) 19.1 (.750) 15.
PAGE 16
■ Sight Glass Mounts Quickly attach tubular sensors to glass and plastic tubes for level detection. Often used in pairs (high-low) to detect absence or presence of liquids to activate pumps and drains in process control applications. Sight glass mounts offer adjustments “on the fly” with visual feedback for M12, M18 and M30 sensors, mounted to 9.5mm (3/8") through 44mm (1-3/4") pipes. Delrin® construction with all stainless steel fasteners provides corrosion resistance.
PAGE 17
■ Sensor Wells Sensor Wells are used to adapt tubular proximity sensors to a wide variety of vessels for level detection applications. Different style wells allow a variety of attachment options. Sensor Wells keep systems sealed prior to sensor installation, as well as during sensor removal. Reliability and performance is improved because the sensor is isolated from the system fluids / materials. Sensor Wells are available in Delrin®, HDPE and Fluoroplastic models Flange Mount, SAE & NPT threads.
PAGE 18
Dimensions Unit: mm (inch) Sensor Well Flange Mount “A” Dimension Model 30.1 (1.19) Y92E-SWFM30 34.1 (1.35) Y92E-SWFM34 Sensor Well NPT Thread A B C D E F NPT G H I Model 44.5 (1.75) 33.0 (1.30) 26.7 (1.05) 9.14 (0.36) 0.76 (0.03) 17.8 (0.70) 1/2x14 25.1 (0.99) 31.8 (1.25) 12.1 (0.48) Y92E-SWNPT12-(D/T) 59.7 (2.35 48.1 (1.90) 38.9 (1.53) 16.5 (0.65) 1.27 (0.05) 22.6 (0.89) 3/4x14 31.5 (1.24) 37.3 (1.47) 18.1 (0.71) Y92E-SWNPT18-(D/T) 1.91 (0.08) 36.6 (1.
PAGE 19
■ Sensor Checker Full Function Sensor Checker in a pocket-sized non-metallic enclosure. Includes easy push-type terminals making wire connections simple and quick. Allows troubleshooting and or demonstration of DC sensors; 2, 3, 4-wire and NAMUR type sensor built to DIN 19234 specifications. Confirms operation of inductive, photoelectric, capacitive and ultrasonic sensors. Wiring instructions are printed on the case. Includes dual operation indicators LED and buzzer.
PAGE 20
■ Weld Jacket Weld Jacket is a protective covering for cordsets. Weld Jacket slips over the cable and the connector portion to offer protection in harsh welding environments. Weld Jacket is available in ½" or ¾" diameter by 3 foot or 50 foot lengths. Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
PAGE 21
Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”).
PAGE 22
OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 001.800.556.6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.