Datasheet

XW5T
11
Terminal Blocks with Fuses
Technical Information for XW5T-S4.0-FU5, XW5T-S4.0-FU6
The fuse blocks of this type have a flip top disconnect lever. It accepts miniature fuses of 5×20, 5×25 and 5×30 mm (terminal width: 8 mm) or
6.3×32 mm (terminal width: 10 mm). The hinged lever has latch points both in the open and in the closed position, and can be sealed.
Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse
holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered
accordingly in these applications.
Model XW5T-S4.0-FU5 XW5T-S4.0-FU6
Appearance and internal wiring
1 tier, 1:1 1 tier, 1:1
Applicable wire sizes
NOMINAL CROSS SECTION 4.0 mm
2
4.0 mm
2
Minimum conductor cross section solid 0.5 mm
2
0.5 mm
2
Maximum conductor cross section solid 6 mm
2
6 mm
2
Minimum conductor cross section fine stranded 0.5 mm
2
0.5 mm
2
Maximum conductor cross section fine stranded 4 mm
2
4 mm
2
Minimum conductor cross section (flex., stranded)
with cable end sleeve
--- ---
Maximum conductor cross section (flex., stranded)
with cable end sleeve
--- ---
Conductor cross section AWG AWG22 to AWG10 AWG22 to AWG10
Wire strip length 8 mm 8 mm
Tightening torque 0.5 Nm 0.5 Nm
Dimensions 8×77.2×62 10×77.2×62
Mounting rail TH35 TH35
IEC rated voltage 800 V 800 V
IEC rated current 6.3 A 10 A
Rated impulse voltage 8 kV 8 kV
UL rated voltage 600 V 600 V
UL rated current 15 A 15 A
End Covers --- ---
Applicable nameplates --- ---
Applicable Short Bars --- ---