Datasheet

XW5T
4
For XW5T-P4.0-@ or XW5G-P4.0-@
* Replace the box (@) in the model number with the code for the covering color. Specify the color: RD = red, BL = blue, YL = yellow
Labels
Note: 1. Different models are used for the top and side surfaces.
2. There is no place to mount the Top-surface Labels on Two-tier Terminal Blocks with a width of 3.5 mm, so they cannot be used.
3. If you use commercially available nameplates (9.5 mm width and 0.5 mm thickness), you can use a commercially available printer. Check
with the manufacturer of the nameplates for information on applicable printers.
4. Refer to page 20 for details on printing labels.
End Cover
End Brackets
Separator Plates
Note: Refer to 6. Using the Accessories on page 20 for information on using the accessories.
Appearance No. of poles Colors Model* Application
2
Red (RD)
Blue (BL)
Yellow (YL)
XW5S-P4.0-2@
Used for cross-over wiring between Terminal Blocks.
3 XW5S-P4.0-3@
4 XW5S-P4.0-4@
5 XW5S-P4.0-5@
10 XW5S-P4.0-10@
Appearance
Applicable
Terminal Blocks
Model
Minimum order in sheets
(quantity per sheet)
Application
XW5@-P1.5-@
XW5Z-P1.5LB1 5 sheets with 102 top labels per sheet
Used to identify wiring. (Material: PA
resin, blank)
XW5Z-P1.5LB2 5 sheets with 108 side labels per sheet
XW5@-P2.5-@
XW5Z-P2.5LB1 5 sheets with 72 top labels per sheet
XW5Z-P2.5LB2 5 sheets with 72 side labels per sheet
XW5@-P4.0-@
XW5Z-P4.0LB1 5 sheets with 60 top labels per sheet
XW5Z-P4.0LB2 5 sheets with 60 side labels per sheet
Appearance Applicable Terminal Blocks Model Application
XW5@-P1.5-1.1-1 XW5E-P1.5-1.1-1
This part is required to prevent electric shock.
Always mount End Covers to the following locations when you
use Terminal Blocks. (For details, refer to page 21.)
• Exposed metal surface of the last Terminal Block
• Any Terminal Block that is next to a different shape of
Terminal Block
XW5@-P1.5-1.1-2 XW5E-P1.5-1.1-2
XW5@-P1.5-1.2-1 XW5E-P1.5-1.2-1
XW5@-P1.5-2.2-1 XW5E-P1.5-2.2-1
XW5@-P2.5-1.1-1 XW5E-P2.5-1.1-1
XW5@-P2.5-1.1-2 XW5E-P2.5-1.1-2
XW5@-P2.5-1.2-1 XW5E-P2.5-1.2-1
XW5@-P2.5-2.2-1 XW5E-P2.5-2.2-1
XW5@-P4.0-1.1-1 XW5E-P4.0-1.1-1
XW5@-P4.0-1.1-2 XW5E-P4.0-1.1-2
XW5@-P4.0-1.2-1 XW5E-P4.0-1.2-1
XW5@-P4.0-2.2-1 XW5E-P4.0-2.2-1
Appearance Width (mm) Model Application
6 XW5Z-EP6
End Brackets are installed on the ends of the Terminal Blocks
to prevent them from moving on the DIN Track.
Appearance Width (mm) Model Application
12 XW5Z-EP12
This part is used to create insulation distance.
Use Separator Plates according to the clearance and creeping
distances required by the operating conditions of your
equipment.