New Product DIN Track Push-In Plus Terminal Blocks XW5T-P Push-In Plus Terminal Blocks to Downsize Control Panels and Save Wiring Work • Push-in Plus terminal blocks are more compact than traditional screw terminal blocks. • No loosening means maintenance-free application. • Slim models available down to a width of 3.5 mm to help downsize control panels. • Light insertion force and strong holding strength to achieve both less wiring work and high reliability.
XW5T-P Ordering Information Product type Applicable wire sizes Applicable wire sizes with ferrules attached Color Wiring Tiers Model 1:1 1:2 Dark gray 2 2 0.08 mm to 1.5 mm AWG 28 to AWG 14 2 1:1 0.14 mm to 1.0 mm AWG 26 to AWG 18 2 0.14 mm to 4.0 mm AWG 26 to AWG 12 2 2 2 2 0.14 mm to 2.5 mm AWG 26 to AWG 14 2 2 0.2 mm to 4.0 mm AWG 24 to AWG 12 0.2 mm to 6.0 mm AWG 24 to AWG 10 XW5T-P1.5-1.2-1 XW5T-P1.5-2.2-1 2 tiers XW5T-P1.5-1.
XW5T-P Ratings and Performance Feed Through Terminal Blocks 1 tier, 1:1 1 tier, 1:1 1 tier, 1:1 Appearance and internal wiring Applicable wire sizes 0.08 to 1.5 mm2 (Stranded wires: 0.08 to 1.5 mm2, Solid wire: 0.14 to 1.5 mm2) AWG28 to AWG14 0.14 to 4.0 mm2 (Stranded wires: 0.14 to 2.5 mm2, Solid wire: 0.14 to 4.0 mm2) AWG26 to AWG12 Model XW5T-P1.5-1.1-1(BL) XW5T-P2.5-1.1-1(BL) XW5T-P4.0-1.1-1(BL) Dimensions 3.5×45×30.5 5.2×48.8×35.25 6.2×56.1×35.
XW5T-P Grounding Terminal Blocks 1 tier, 1:1 1 tier, 1:1 1 tier, 1:1 Appearance and internal wiring Applicable wire sizes 0.08 to 1.5 mm2 (Stranded wires: 0.08 to 1.5 mm2, Solid wire: 0.14 to 1.5 mm2) AWG28 to AWG14 0.14 to 4.0 mm2 (Stranded wires: 0.14 to 2.5 mm2, Solid wire: 0.14 to 4.0 mm2) AWG26 to AWG12 0.2 to 6.0 mm2 (Stranded wires: 0.2 to 4.0 mm2, Solid wire: 0.2 to 6.0 mm2) AWG24 to AWG10 Model XW5G-P1.5-1.1-1 XW5G-P2.5-1.1-1 XW5G-P4.0-1.1-1 Dimensions 3.5×45×30.5 5.2×48.8×35.25 6.
XW5T-P Dimensions (Unit: mm) DIN Track Terminal Blocks XW5T-P1.5-1.1-1(BL)/XW5G-P1.5-1.1-1 XW5T-P2.5-1.1-1(BL)/XW5G-P2.5-1.1-1 3.5 5.2 48.8 45 24.5 29.25 30.5 35.25 XW5T-P1.5-1.2-1(BL)/XW5G-P1.5-1.2-1 XW5T-P4.0-1.1-1(BL)/XW5G-P4.0-1.1-1 3.5 56.1 6.2 54.1 24.5 29.25 35.25 30.5 XW5T-P1.5-2.2-1(BL)/XW5G-P1.5-2.2-1 3.5 63.2 24.5 30.5 XW5T-P1.5-1.1-2(BL)/XW5G-P1.5-1.1-2 65.7 3.5 33.7 35.1 24.5 41.1 30.
XW5T-P Short Bars XW5S-P1.5-@ 3.5×(No. of poles-1)+2.3 3 Model XW5S-P1.5-2@ 18.2 P (mm) 3.5 XW5S-P1.5-3@ 7 XW5S-P1.5-4@ 10.5 XW5S-P1.5-5@ 14 XW5S-P1.5-10@ 31.5 1.6 3.5 XW5S-P2.5-@ 5.2×(No. of poles-1)+3.7 3 Model 23 P (mm) XW5S-P2.5-2@ 5.2 XW5S-P2.5-3@ 10.4 XW5S-P2.5-4@ 15.6 XW5S-P2.5-5@ 20.8 XW5S-P2.5-10@ 46.8 1.6 5.2 XW5S-P4.0-@ 6.2×(No. of poles-1)+4.4 3 Model 23 1.6 6.2 6 P (mm) XW5S-P4.0-2@ 6.2 XW5S-P4.0-3@ 12.4 XW5S-P4.0-4@ 18.6 XW5S-P4.0-5@ 24.8 XW5S-P4.
XW5T-P End Cover XW5E-P1.5-1.1-1 XW5E-P2.5-1.1-1 2.2 45 2.2 48.8 24.5 29.4 XW5E-P1.5-1.2-1 XW5E-P4.0-1.1-1 2.2 2.2 56.1 54.1 24.5 29.4 XW5E-P1.5-2.2-1 2.2 63.2 24.5 XW5E-P1.5-1.1-2 2.2 65.4 35.1 End Brackets/Separator Plates XW5Z-EP12 (Separator Plates) XW5Z-EP6 (End Brackets) 6 55 12 56 33.5 40.
XW5T-P Safety Precautions Warning Indications Precautions for Safe Use Precautions for Correct Use Precautions for Correct Use Supplementary comments on what to do or avoid doing, to use the product safely. Supplementary comments on what to do or avoid doing, to prevent failure to operate, malfunction, or undesirable effects on product performance. Precautions for Safe Use • Do not wire anything to the release holes.
XW5T-P Checking Connections • After the insertion, pull gently on the wire to make sure that it will not come off and the wire is securely fastened to the terminal block. • To prevent short circuits, insert the stripped part of a stranded or solid wire or the conductor part of a ferrule until it is hidden inside the terminal insertion hole. (See the following diagram.) 3. Removing Wires from the Push-In Plus Terminal Block Use the following procedure to remove wires from the terminal block.
XW5T-P Recommended Flat-blade Screwdriver 5. Mounting to DIN Track/Removing from DIN Track Use a flat-blade screwdriver to connect and remove wires. Use the following flat-blade screwdriver. The following table shows manufacturers and models as of 2015/Dec. Mounting Method Side To mount a Terminal Block to a DIN Track, press it against the DIN Track as shown in the following figure. Front 2.5 mm dia. 0.4 mm 2.5 mm Model XW4Z-00B Manufacturer Omron ESD0.40✕2.5 Wera SZF 0.4✕2.
Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”).
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.
