Datasheet

XW5T
10
Recommended Flat-blade Screwdriver
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
The following table shows manufacturers and models as of 2015/Dec.
5. Mounting to DIN Track/Removing from DIN Track
Mounting Method
To mount a Terminal Block to a DIN Track, press it against the DIN
Track as shown in the following figure.
Removal Method
To remove a Terminal Block from the DIN Track, catch the tip of a
screwdriver in the hook, operate the screwdriver so that the tip moves
in direction (1), and then remove the Terminal Block in direction (2).
However, do not apply excessive force to the Terminal Block. Doing
so may damage it.
6. Storage
Store the Terminal Block within the following temperature range.
-40 to 85°C (with no condensation or icing)
Model Manufacturer
XW4Z-00B Omron
ESD0.40✕2.5 Wera
SZF 0.4✕2.5 Phoenix Contact
0.4✕2.5✕75 302 Wiha
AEF.2.5✕75 Facom
210-719 Wago
SDI 0.4✕2.5✕75 Weidmuller
Side
0.4 mm
2.5 mm dia.
2.5 mm
Front
(1)
(2)