Datasheet

XS3
17
XS3P Panel-mounting Sockets for Terminal Boxes
Mating Connectors
Note: M8 screw-on models and S8 snap-in models cannot be connected to each other.
Ordering Information
Note: Orders are accepted in multiples of the minimum order.
Safety Precautions
In addition to the following information, also refer to Safety Precautions on page 23
Panel Mounting
• When mounting XS3P Panel-mounting Connectors to panels, refer to Panel-mounting Dimensions and provide rubber bushings
and nuts for the Connectors. Apply a tightening torque of between 0.4 and 0.6 N·m to mount the Connectors.
Item Model
XS3P(M8) XS3H (M8), XS3W (M8)
XS3P(S8) XS3H (S8), XS3W (S8)
Connection method Panel mounting Pin shape Applicable wires Model Minimum order
M8 screw-on
Front lock or rear lock
DIP pins --- XS3P-M421-1
50
Solder cup pins AWG24 max. XS3P-M421-2
Rear lock Solder cup pins AWG24 max. XS3P-M422-2
S8 snap-in Front lock or rear lock
DIP pins --- XS3P-S421-1
Solder cup pins AWG24 max. XS3P-S421-2
Precautions for Correct Use