Datasheet

XS2
6
XS2F Socket on One Cable End
Model Number Structure
Model Number Legend
Use this model number legend to identify products from their model number. Use this model number legend to identify products from their
model number. When ordering, use a model number from the table in Ordering Information.
XS2F-@@2@-@@0-@@
1. Type
F: Connector with cables, socket on one cable end
2. AC/DC (Mating Section Form)
A: For AC
D: For DC
E: For DC, stainless steel lock
3. Connector Poles
4: 4 poles
5: 5 poles
4. Contact Plating
2: Gold plating
5. Cable Connection Direction
1: Straight
2: Right-angle
6. Cable Length
A : 0.3 m
B : 0.5 m
C: 1 m
D: 2 m
E: 3 m
F: 4 m
G: 5 m
H: 7 m
J: 10 m
K: 15 m
L: 20 m
Note: Only the 2 m (D), 5 m (G) and 10 m (J) cables are available for cables
with 5 poles.
7. Connections
(Numbers inside circles are terminal numbers)
A: A Brown, B ---, C ---, D Blue (for DC)
B: A ---, B ---, C Brown, D Blue (for AC)
C: A Brown, B ---, C Blue, D Black
D: A ---, B ---, C Blue, D Brown
8: A Brown, B White, C Blue, D Black (for DC)
9: A Brown, B White, C Blue, D Black (for AC)
G: A Brown, B ---, C Blue, D Black, E Gray
8. Connectors on One End/Both Ends
0: One end
9. Cable Specifications
F: Standard cable (Fire-retardant, Robot cable)
E: Heat-resistant cable up to 105°C
SA: Spatter-resistant cable
A: Standard cable
Note: E type and SA type is a 4-core cable.
312 45 678 9
Designations for Non-polar DC
(For Limit Switches and Sensors)
6. Cable Length
3: 2 m
4: 5 m
7. Connections
(Numbers inside circles are terminal numbers)
1: A ---, B ---, C Black, D White
8. Connectors on One End/Both Ends
0: One end
9. Cable Specifications
Not designated.
Note: DC non-polarity models have different specific codes. (6, 7 and 9)