Datasheet

WL-N/WLM-N
50
Dimensions and Structure (Unit: mm)
Connectors for Cabtire Cable
As for models without an O-ring, please use sealing tape with SC Connectors.
Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm.
Simple Connectors (Not Suitable for Locations Subject to Oil or Water)
Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm.
* Diameter of Part Marked with Asterisk
Model
Inner diameter (D)
of sealed rubber
Internal diameter
(E) of washer
Applicable cable
SC-21, -1M, -1PT 7 mm 10.4 mm 5.5 to 7.5-mm dia.
SC-22, -2M, -2PT 9 mm 13.2 mm 7.5 to 9.5-mm dia.
SC-23, -3M, -3PT 12.5 mm 14.6 mm 11 to 13-mm dia.
SC-24, -4M, 4PT 14 mm 14.6 mm 12 to 14-mm dia.
SC-25, -5M, -5PT 11 mm 13.2 mm 9 to 11-mm dia.
SC-6 9 mm 10 mm 7.5 to 9-mm dia.
14 dia.
14.6 dia.
27.7
29.3
*E
15
4.8
9
(34)
24
JIS B 0202 G
½
*D
Sealing rubber
(nitrile rubber)
Connector
(brass and nickel plating)
Washer (stainless steel)
Ball head lock nut
(brass and nickel plating)
Metal Models without O-ring
G½
SC-21 to 25
3029.3
15 5 9
27
14 dia.
14.6 dia.
*E
(34)
JIS B 0202 G
½
Sealing rubber (nitrile rubber)
*D
Sealing rubber
(nitrile rubber)
Connector
(zinc die-cast and
zinc plating)
Washer (stainless steel)
Ball head lock nut
(zinc die-cast and zinc plating)
Metal Models with O-ring
G½
SC-1M to 5M
27.729.3
15
5
14
24
14 dia.
14 dia.
14.6 dia.
(39)
½-14NPT
*D
Sealing rubber (nitrile rubber)
Connector
(zinc die-cast and
zinc plating)
Washer (stainless steel)
Ball head lock nut
(zinc die-cast and zinc plating)
Metal Models without O-ring
½-14NPT
(U.S.-standard screws)
SC-1PT to 5PT
22
25.4
15
1 4.5
5
10.6 dia.12.6 dia.
18 dia.18 dia.
JIS B 0202
G
½
Hexagonal nut
(polyacetal resin)
Conduit washer
(ferrous metal and
zinc plating)
Ring (chloroprene rubber)
Resin Models
G½
SC-P2
21
23.5
15.5
14.5
5
Pg13.5
9.6 dia.12 dia.
18 dia.18 dia.
Hexagonal nut
(polyacetal resin)
Conduit washer
(ferrous metal and
zinc plating)
Ring (chloroprene rubber)
Resin Models
Pg13.5
SC-P3
22.5
26
95
12
9
10
(30.6)
12
9
G
½
Ball head lock nut
(polyacetal resin) Sealing rubber (nitrile rubber)
Connector
(polyacetal resin)
M20 × 1.5
Washer
(ferrous metal and
zinc plating)
*D
Resin Models
G½
SC-6