Datasheet

WL-N/WLM-N
48
Operation of Fork Lever Locks
A Switch with a Fork Lever Lock is constructed so that the dog pushes the lever to invert the output and this inverted state is maintained even after
the dog moves on.
If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Adjusting the Length of the Rod or
Lever
The length of the rod or lever can be
adjusted by loosening the Allen-head
bolt.
Adjustable Roller Levers:
(WLCA12-N, WLCA12-2-N,
WLCA12-2N-N, WLG12-N)
Adjustable rod lever:
(WLCL-N, WLCL-2-N,
WLCL-2N-N, WLGL-N, WLCAL4-N)
Selecting the Roller Position
There are four types of Switches with
Fork Lever Locks for use depending on
the roller position.
Fork lever lock:
(WLCA32-4@-N)
An explanation of the operation of fork lever locks is provided after this
table.
Item Applicable models and Actuators Details
Loosen this
Allen-head bolt
and adjust the
length of the rod.
Adjustment
range radius:
25 to 89 mm
Adjustable Roller Levers: Adjustable Rod Levers:
Loosen this
Allen-head bolt
and adjust the
length of the
lever.
Adjustment
range radius:
24 to 140 mm
WLCA32-41-N WLCA32-43-N
WLCA32-42-N WLCA32-44-N
NC terminal: ON NO terminal: ON NO terminal: ON
Example