Datasheet

WL-N/WLM-N
10
Model Number Legend (Not all combinations are possible. Contact your OMRON representative for details.)
(1) Actuator and Property Specifications
(2) Environment-resistant Model Specifications
(3) Built-in Switch Type
(4) Temperature Specifications
*1. Cannot be combined with Corrosion-proof (RP) or Weather-proof
(P1) Switches.
(5) Hermetic Specification
(6) Conduit Size, Ground Terminal Specifications
*2. Models with ground terminals are certified for EN/IEC (CE
Marking).
(7) Indicator Type
*3. Cannot be combined with Corrosion-proof (RP), Weather-proof
(P1), Heat-resistant (TC), or Low-temperature (TC) Switches.
(8) Indicator Wiring Specification
*4. Always include the indicator wiring specification if you specify a
(5) hermetic structure and an (7) indicator.
(9) Lever Type
Environment-resistant Switches
WL@ - @@@@@@@@-N
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Code Lever Pretravel (PT)
CA2 Roller lever: R38 mm
15±5°
CA2-7 Roller lever: R50 mm
CA2-8 Roller lever: R63 mm
CA12 Adjustable roller lever: R25 to 89 mm
CL Adjustable rod lever: 25 to 140 mm
CAL4 Adjustable rod lever: 350 to 380 mm
CAL5 Rod spring lever
CA2-2 Roller lever: R38 mm
25±5°
CA12-2 Adjustable roller lever: R25 to 89 mm
CL-2 Adjustable rod lever: 25 to 140 mm
CA2-2N Roller lever: R38 mm
MAX 20°
CA12-2N Adjustable roller lever: R25 to 89 mm
CL-2N Adjustable rod lever: 25 to 140 mm
G2 Roller lever, high sensitivity: R38 mm
10°
G12
Adjustable roller lever, high sensitivity: R25
to 89 mm
GL
Adjustable rod lever, high sensitivity: 25 to
140 mm
GCA2 Roller lever, high precision: R38 mm 5°
CA32-41 Fork lever lock
55°
CA32-42 Fork lever lock
CA32-43 Fork lever lock
D18 Sealed top plunger
1.7 mm
D28 Sealed top-roller plunger
D38 Sealed top-ball plunger
SD Horizontal plunger
2.8 mm
SD2 Horizontal-roller plunger
SD3 Horizontal-ball plunger
NJ Flexible rod: Coil spring
20±10 mm
NJ-30 Flexible rod: Coil spring, multi-wire
NJ-2 Flexible rod: Resin rod
40±20 mm
NJ-S2 Flexible rod: Steel wire
Code Specifications
Blank Standard
RP Corrosion-proof
P1 Weather-proof
Code Specifications
Blank Standard built-in switch
55 Airtight built-in switch
Code Specifications
Blank Standard: −10°C to +80°C
TH Heat-resistant: +5°C to +120°C *1
TC Low-temperature: −40°C to +40°C *1
+2°
−1°
+2°
0°
Code Specifications
Blank No cable molding.
139
Standard built-in switch. Cable is attached.
Molded conduit opening and cover. (The cover cannot be re-
moved.)
140
Airtight built-in switch. Cable is attached.
Molded conduit opening, cover, and cover screws. (The cover
cannot be removed.)
141
Airtight built-in switch. Cable is attached.
Molded conduit opening, cover, head, cover screws, and head
screws. (The cover cannot be removed and the head direction
cannot be changed.)
Double seal against oil including head cap countermeasure for
cutting chips and an oil seal.
145
Airtight built-in switch. Cable is attached.
Molded conduit opening, cover, and cover screws. (The cover
cannot be removed. The head can be mounted in any of 4 di-
rections.)
Double seal against oil including head cap countermeasure for
cutting chips and an oil seal.
RP40
Airtight built-in switch. Cable is attached.
Molded conduit opening and cover. (The cover cannot be re-
moved.)
SC Connector can be removed, so it is possible to use flexible
conduits for the cable.
RP60
Airtight built-in switch. Cables are attached.
Molded conduit opening, cover, cover screws, and head
screws. (The cover cannot be removed and the head direction
cannot be changed.)
Fluorine rubber is used for all rubber parts.
Code
Specifications
Conduit Size Ground terminal
Blank G1/2 None
G1 G1/2
Provided *2
G Pg13.5
YM20
TS 1/2-14NPT
Code Specifications
Blank No indicator
LE Neon lamp: 125 to 250 VAC
LD LED (10 to 115 VAC/DC)
Code Specifications
2 NC connection: Light-ON when operating
3 NO connection: Light-ON when not operating
Code Specifications
Blank Standard lever (Allen-head bolt)
A Double nut lever