Datasheet

Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and
workmanship for a period of one year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED,
REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR
PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER
OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE
REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH
THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the
product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER
CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE
PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION
OR REPAIR.
The application examples provided in this catalog are for reference only. Check functions and safety of the equipment before use.
Never use the products for any application requiring special safety requirements, such as nuclear energy control systems, railroad systems, aviation systems, medical equipment, amusement
machines, vehicles, safety equipment, or other application involving serious risk to life or property, without ensuring that the system as a whole has been designed to address the risks, and
that the OMRON products are properly rated and installed for the intended use within the overall equipment or system.
Summary of Functions
Product name
Industrial
Switching Hubs
Model Standards
Functions
No. of ports
Current
consumption (A)
3 W4S1-03B
W4S1-05B
W4S1-05C
5
0.22
0.22
UC, CE
5 CE
Accessories
· Power supply connector
Specifications
Dimensions
(Unit: mm)
Ordering Information
Specifications
24 VDC ±5%
5.28

W max
lp = 1.42 A
1 mA at 250 VAC for 1 minute
(Between LAN connectors, between error output connectors,
and between FG and power supply connectors)
Power supply voltage
Power consumption
Inrush current
148,800 pps
Throughput
*
2
3-port model: 500 Mbps
5-port model: 700 Mbps
Switching capacity
(Switching fabric)
*
1
Dielectric strength
EMI and EMS
Vibration Resistance
Setting method
Ambient operating environment
JIS C60068-2-6 conforming, 5 to 8.4Hz, 3.5mm amplitude, 8.4 to 150 Hz, acceleration 9.8m/s
2
Shock Resistance
JIS C60068-2-27 conforming, 196m/s
2
EN: 61000-6-4 2007 and EN: 61000-6-2 2005
Settings are made in the Switching Hub.
No corrosive gas
Ambient operating temperature
0 to 55°C (with no icing and no condensation)
Ambient operating humidity
10% to 90% (with no condensation)
Ambient storage temperature
-20 to 75°C (with icing and no condensation)
Note: Do not use this document to operate the Unit.
Authorized Distributor:
In the interest of product improvement,
specifications are subject to change without notice.
© OMRON Corporation 2009-2013 All Rights Reserved.
OMRON Corporation Industrial Automation Company
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: [phone]/Fax: [phone]
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69-2132 JD Hoofddorp
The Netherlands
Tel: [phone]/Fax: [phone]
Contact: www.ia.omron.com
Tokyo, JAPAN
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: [phone]/Fax: [phone]
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: [phone]/Fax: [phone]
Cat. No. V227-E1-03
Printed in Japan
0413 (1008)
Failure detection
NO
NO
YES
Quality of Service (QoS):
Failure detection:
EtherNet/IP control data priority
Broadcast storm and LSI error detection
10/100BASE-TX, Auto-Negotiation
International standards (See note.)
EC Directives
*
1. Switching capacity per Unit.
*
2. Maximum throughput for 64-byte data at 100 Mbps.
Throughput per port. There is no difference between the models (3-port and 5-port models).
Note: Contact your OMRON representative for further details and applicable conditions for these standards.
W4S1-03B W4S1-05B W4S1-05C
3
Supported
55
Supported Supported
Supported
Supported
Not supported
Not supported
Not supported
Not supported
Not SupportedNot SupportedNot Supported
80 KB
2,000
No. of ports (RJ45)
Auto MDI/MDI-X
Supported Supported SupportedAuto Negotiation
Supported Supported Supported Store-and-Forward system
IEEE 802.3 10BASE-T,100BASE-TXEthernet standards
Buffer
MAC addresses
SW-LSI and microcomputer
error detection
Broadcast storm detection
Port mirroring
Not SupportedNot SupportedNot SupportedIGMP Snooping
Not SupportedNot SupportedNot SupportedSTP
Not SupportedNot SupportedNot SupportedVLAN
Not SupportedNot SupportedNot SupportedSNMP
SupportedSupportedSupportedQoS for EtherNet/IP
· Power supply connector
· Connector for informing error
International Standards
•
The standards are abbreviated as follows: UC: cULus and CE: EC Directives.
•
Contact your OMRON representative for futher details applicable conditions for these standards.
W4S1-03B
W4S1-05B
W4S1-05C
48
10.3
23
13.72
10.3
2.72
MOVING POSITION
13.5
5.1
25
1.2
65.6
25°
25°
25°
25°
44.6
23.6
8
78
90
82.6
78
65.6
25°
25°
25°
25°
44.6
23.6
8
90
82.6
5.1
13.4
MOVING POSITION
6.9
CSM_5_1_1015