Datasheet

Sysmac Studio
18
Function Specifications of CNC Functions
Version Information
Please refer to "Change history" in the website at: www.fa.omron.co.jp/ss_rev_e/.
Item Function Applicable versions
Setting Parameters
CNC Setup
You can register the CNC coordinate system and CNC motors to use
with CNC instruction.
You can also assign the Servo Drives to the CNC motors and
configure the CNC motor parameters.
Ver.1.20 or higher with NJ501-
5300 / NY532-5400
CNC Coord Settings
The coordinate system is added to the project and you can assign
CNC motor to the coordinate system.
CNC Motor Settings
The CNC motor is assigned to the project and you can configure its
parameters.
CNC Motor Compensation
Table
The CNC Motor Compensation Table is assigned to the project and
you can set the CNC motor compensation data.
Programming NC Programming You can create the NC Program by using G Code language.
Ver.1.20 or higher with NJ501-
5300 / NY532-5400