Datasheet

Sysmac Studio
16
FH-series Vision Sensors
Note: Supported only by the Sysmac Studio version 1.07 or higher.
*1. Supported only by the Sysmac Studio version 1.10 or higher.
*2. Supported only by the Sysmac Studio version 1.14 or higher.
*3. Supported only by the Sysmac Studio version 1.08 or higher.
*4. Supported only by the Sysmac Studio version 1.09 or higher.
Item Function
Setting Parameters
−
Main Edit
Sensor Information Displays and sets basic information of the sensor.
Online
Changes the connection status of the sensor, and performs various controls such as sensor restart
and initialization.
Line Edit
Operation View Monitors the measurement images of the sensor and detailed results of each process unit.
Scene Maintenance View Edits, manages, and saves the scene groups and scenes.
Scene Data Edit
Flow Edit Creates the process flow in combination of user-specified units.
Process Unit Edit Edits each process unit.
Sensor System
Data Edit
Camera Settings Checks the camera connection status and sets the camera's imaging timing and communications speed.
Controller Settings Makes the system environment settings for the sensor.
Parallel I/O Settings Sets the conditions of output signals.
RS-232C/422 Settings Makes the RS-232C/422 communications settings.
Ethernet Communication
Settings
Makes the Ethernet communication settings.
EtherNet/IP
Communication Settings
Makes the EtherNet/IP communications settings.
EtherCAT Communication
Settings
Makes the EtherCAT communications settings.
Encoder Settings Makes the encoder settings.
Tools
Communication Command
Customization Tool
Makes the settings for customized communication commands.
File Saving Tool Copies and transfers the files in the sensor memory.
Calibration Support Tool Checks the calibration information.
User Data Tool Edits the data (user data) that can be shared and used in sensors.
Security Setting Tool *1 Edits the security settings of the sensor.
Scene Group Save
Destination Setting Tool *1
Sets the destination to save the scene group data.
Image File Save Tool *1 Saves the logging images and image files stored in the sensor memory.
Registered Image
Management Tool *1
Saves the images used for model registration and reference registration as registered images.
Reference Position Update
Tool *1
Edits all reference positions of more than one processing unit.
Scene Group Data
Conversion Tool *1
Creates the scene group data with more than 128 scenes.
Scene Control Macro Tool
*1
Makes a setting for complementing and expanding the measurement flow and scene control.
Conveyor Calibration
Wizard Tool *2
Calibrates cameras, conveyors, and robots in a conveyor tracking application.
Calibration Plate Print Tool
*2
Prints out calibration patterns that are used in the Conveyor Calibration Wizard.
Conveyor Panorama
Display Tool *2
Displays a panoramic image in a conveyor tracking application.
Debugging
Offline Debugging of
Sensor Operation
Simulates measurements offline without connecting to the sensor. You can use external image files
and perform measurements under the conditions set in the offline settings, then display the results of
those measurements.
Offline Debugging of
Sensor Control Program
and Sensor Operation *3
Simulates the linked operation of the sequence controls in the NJ/NX-series CPU Unit or NY-series
Industrial PC and FH-series Sensor operation for an EtherCAT system.
You can debug a series of operations offline to perform the measurement and other processing and
output the results when a control signal such as measurement trigger is input to the Sensor.
Security
Prevention of Incorrect
Operation *4
Prevents unauthorized access by setting an account password for online operations.