Datasheet

S82S
S82S
5
Dimensions
Note: All units are in millimeters unless otherwise indicated.
S82S-73jj (3 W)
S82S-77jj (7.5 W)
Mounting Holes
M4 or 4.5 dia.
Mounting bracket
(provided with the
model)
27
75
61
37.5
9.8
65
4
7.3 (See note 1)
Note: 1. A distance of 7.3 mm is required between the model and the mounting surface
when the mounting bracket provided with the model is used.
2. If more than one Power Supply is installed in a row , keep a distance of 20 mm
min. (L = 20 mm min.) between each adjacent Power Supply .
4.6
(Sliding 7 max.)
35
Six, M3.5
L
(see
note 2)
Installation
Terminal Arrangement
1. DC Output Terminals: Connect the load lines to these
terminals.
2. Input Terminals: Connect the input lines to these
terminals.
Note: A
fuse is inserted to side +V .
3. Ground Terminal: Connect a ground line to this
terminal.
4. Output LED Indicator: Lights while a DC output is ON
(for
the Dual Output Models, this indicator is lit when the
+V DC output is ON).
5. V.ADJ Adjuster:
Adjusts the output voltage.
6. NC Terminals: V acant terminals.
5
6
4
4
11
1
23 23
Dual Output Models Single Output Models
S82S-7724