Datasheet

LY
7
Malfunctioning Shock
LY2 100/110 VAC
Dimensions (Unit: mm)
Solder terminals
Y
XZ
X'
Z'
Energized
Not energized
Y'
Unit: m/s
2
560
720
520
450
500
370
520
700
440
500
600
350
X'
Y'
Z'
Y
X
Z
Shock direction
36 max.
21.5 max.
6.4
0.5
3
5
28 max.
Eight, 2-dia. holes
LY1
LY1N
LY1-D
LY1N-D2
Note: 1. For the DC models, check the coil polarity
when wiring and wire all connections
correctly.
2. The indicator is red for AC and green for DC.
3. The operation indicator indicates the
energization of the coil and does not
represent contact operation.
Terminal Arrangement/Internal Connections (Bottom View)
LY1 LY1N-D
(The coil has no polarity.)
(Check the coil polarity when wiring
and wire all connections correctly.)
LY1N
DC Models AC Models
LY1N-D2
Check the coil polarity when
wiring and wire all connections
correctly.
(The coil has no polarity.)
Check the coil polarity when wiring
and wire all connections correctly.
36 max.
21.5 max.
6.4
0.5
3
5
28 max.
Eight, 3-dia. holes
LY2
LY2Z
LY2N
LY2ZN
Note: 1. For the DC models, check the coil polarity
when wiring and wire all connections
correctly.
2. The indicator is red for AC and green for DC.
3. The operation indicator indicates the
energization of the coil and does not
represent contact operation.
LY2(Z)N
DC Models AC Models LY2(Z)N-D2
Check the coil polarity when
wiring and wire all connections
correctly.
(The coil has no polarity.)
Check the coil polarity when wiring
and wire all connections correctly.
Terminal Arrangement/Internal Connections (Bottom View)
LY2(Z) LY2(Z)-D
(The coil has no polarity.)
Check the coil polarity when wiring and wire all
connections correctly.
LY2-D
LY2Z-D
LY2N-D2
LY2ZN-D2
N = 20
Measurement: Shock was applied 2 times each in 6 directions along 3 axes
with the Relay energized and not energized to check the shock values that
cause the Relay to malfunction.
Criteria: Non-energized: 200 m/s
2
, Energized: 200 m/s
2