Datasheet

MY
14
Characteristics
Note: These are initial values.
*1. Measurement conditions: 1 A at 5 VDC using the voltage drop method
*2. Measurement conditions: When rated operating power is applied and ambient temperature is 23° C
*3. Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.
*4. Ambient temperature condition: 23° C
*5. This value was measured at a switching frequency of 120 operations per minute.
Item Type 2 poles 4 poles 4 poles (bifurcated)
Contact resistance
*1
100 mΩ max.
Operation time
*2
20 ms max.
Release time
*2
20 ms max.
Maximum
operating
frequency
Mechanical 18,000 operations/h
Rated load 1,800 operations/h
Insulation resistance
*3
1,000 MΩ min.
Dielectric
strength
Between coil
and contacts
2,000 VAC at 50/60 Hz for 1 min.
Between
contacts of
different
polarity
Between
contacts of the
same polarity
1,000 VAC at 50/60 Hz for 1 min.
Vibration
resistance
Destruction 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Malfunction 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock
resistance
Destruction 1,000 m/s
2
Malfunction 200 m/s
2
Endurance
Mechanical
AC: 50,000,000 operations min., DC: 100,000,000 operations min. (switching
frequency: 18,000 operations/h)
20,000,000 operations min. (switching
frequency: 18,000 operations/h)
Electrical
*4
500,000 operations min.
(rated load, switching frequency: 1,800
operations/h)
200,000 operations min.
(rated load, switching frequency: 1,800
operations/h)
100,000 operations min.
(rated load, switching frequency: 1,800
operations/h)
Failure rate P value
(reference value)
*5
1 mA at 5 VDC 1 mA at 1 VDC 100 µA at 1 VDC
Weight Approx. 35 g