Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationFront Connecting Socket

Analogue Temperature Controller E5C2 I-7

Temperature

Controller

Analogue Temperature Controller

E5C2

DIN-sized (48 x 48 mm) Temperature

Controller with Analog Setting

• Compact, low-cost Temperature Controller.

• Incorporates proportional control and reset adjustment function.

• Consecutive mounting possible using mounting adapter.

• Incorporates a plug-in socket, thus allows to DIN-track and flush

mounting.

Model Number Structure

■ Model Number Legend

1. Model name

2. Control output

R: Relay

Q: Voltage

3. Control method

20: ON-OFF control

40: P control

4. Input type

K: K-type thermocouple

L: J-type thermocouple

P: Platinum resistance thermometer (PT100)

G: Thermistor (THE)

5. Special type

Blank: Standard type

D, DIN: Special types

Ordering Information

■ Temperature Controllers

Note: When placing an order, specify the standard temperature range and supply voltage in addition to the model number.

(e.g., E5C2-R20K 0

°C to 200°C 100/110 VAC)

■ Accessories (Order Separately)

12345

E5C2- @ @ @ @

Setting

method

Indication

method

Control mode Output Model

Thermocouple Platinum resistance

thermometer

Pt100

Thermistor

THE

K (CA)

Chromel vs.

alumel

L (IC)

Iron vs.

constantan

Analog setting No indication ON/OFF Relay E5C2-R20K

E5C2-R20L-D

E5C2-R20P-D E5C2-R20G

P Relay E5C2-R40K

E5C2-R40L-D

E5C2-R40P-D ---

Name Model

Front Connecting Socket P2CF-08

Back Connecting Socket (for flush mounting) P3G-08

Front Connecting Socket with Finger Protection P2CF-08-E

Protective Cover (for finger protection) Y92A-48G

Summary of content (6 pages)

PAGE 1
Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting • Compact, low-cost Temperature Controller. • Incorporates proportional control and reset adjustment function. • Consecutive mounting possible using mounting adapter. • Incorporates a plug-in socket, thus allows to DIN-track and flush mounting. ® Model Number Structure ■ Model Number Legend E5C2- @ @ @ @ 1 2 3 4 5 4.
PAGE 2
Specifications ■ Ratings Supply voltage 100/110/120 VAC (common), 200/220/240 VAC (common) (See note.) 50/60 Hz (common) Operating voltage range 90% to 110% of rated supply voltage Power consumption Approx.
PAGE 3
Nomenclature Temperature setting knob Operation indicator RESET adjustment shaft No reset function is incorporated by any E5C2 model with ON/OFF control. Operation Indicator Indicator Red Output Lit ON Not lit OFF Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement (Bottom View) 48 x 48 44.8 x 44.
PAGE 4
Accessories (Order Separately) P2CF-08 Front Connecting Socket Terminal Arrangement/ Internal Connections (Top View) Eight, M3.5 x 7.5 sems Mounting Holes Two, 4.5 dia. or Two, M4 70 max. Two, 4.5-dia. holes Note: Can also be mounted to a DIN track. 50 max. 20 max. Note: A finger-protection model (P2CF-08-E) is also available. P3G-08 Back Connecting Socket (for Flush Mounting) Terminal Arrangement/ Internal Connections (Bottom View) 27 dia.
PAGE 5
Precautions Mounting Track Mounting (E5C2 with P2CF-08) When mounting two or more E5C2 models with track-mounting sockets, leave a space of approximately 20 mm on both sides of the sockets where hooks are located. Hook Duct P2CF-08 20 Panel Flush Mounting Insert E5C2 into the square hole of the panel and insert an adapter from the back so that there will be no space between E5C2 and the panel. Then, secure the E5C2 with a screw.
PAGE 6
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. H081-E1-02 I-12 In the interest of product improvement, specifications are subject to change without notice.