Datasheet

OS32C
7
Power Cable
Ethernet Cable
Note: An ethernet cable with an M12, 4-pin connector is required.
Mounting Brackets
* There are eight OS32C mounting screws: four screws for singular use, and four screws for protective cover for window.
Appearance Description Model Remarks
Cable length: 3 m OS32C-CBL-03M
One cable is required per sensor.
Cable length: 10 m OS32C-CBL-10M
Cable length: 20 m OS32C-CBL-20M
Cable length: 30 m OS32C-CBL-30M
Appearance Description Model Remarks
Cable length: 2 m OS32C-ECBL-02M
Required for configuration and monitoring.Cable length: 5 m OS32C-ECBL-05M
Cable length: 15 m OS32C-ECBL-15M
Appearance Description Model Remarks
Bottom/side mounting bracket OS32C-BKT1
Bottom/side mounting bracket x 1,
unit mounting screws x 4 sets
XY axis rotation mounting bracket OS32C-BKT2
XY axis rotation mounting bracket x 1,
unit mounting screws x 6 sets,
bracket mounting screws x 1 set
(must be used with OS32C-BKT1)
Simple mounting bracket OS32C-BKT3
Simple mounting brackets x 2,
unit mounting screws x 4 sets *
Protective cover for window OS32C-BKT4
Mounting stand OS32C-MT
When using a mounting stand, use an OS32C with
side location cable entry (OS32C-SP1(-DM)).
The OS32C with back location cable entry
(OS32C-BP(-DM)) cannot be mounted.
Use with mounting brackets (OS32C-BKT1 and
OS32C-BKT2).
Hardware kit for mounting stand OS32C-HDT
Mounting screws x 3 sets
Use this when mounting a bracket to the mounting
stand.