Datasheet

6
Safety Laser Scanner
OS32C
Compact (104.5 mm), lightweight (1.3 kg)
and easy-to-install Safety Laser Scanner
• Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a
dedicated controller.
• Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
• 70 sets of safety zone and warning zone combinations are available,
supporting complicated changes in working environments.
• A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set.
• The minimum object resolution can be changed to 30, 40, 50 or 70 mm.
• The response time is configurable from 80 ms to a maximum of 680 ms.
• Reference Boundary Monitoring function prevents unauthorized changes in
the scanner position.
• Minimal down time, sensor block can be replaced without the need to
reprogram.
Ordering Information
OS32C (Power cable is sold separately.)
* For OS32C-SP1(-DM), each connector is located on the left as viewed from the back of the I/O block.
Refer to “Safety Precautions” on page 20.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Appearance Description
Max. Operating
Range
(Safety Zone)
Model Remarks
OS32C with back
location cable entry
3m OS32C-BP VER2
CD-ROM (Configuration tool)
OS supported:
Windows 2000,
Windows XP (32-bit version,
Service Pack 3 or later)
Windows Vista (32-bit version),
Windows 7 (32-bit version/64-bit version)
For configuration tool version, refer to page 23.
4m
OS32C-BP-4M
OS32C with side
location cable entry
*
3m OS32C-SP1 VER2
4m
OS32C-SP1-4M
OS32C with
EtherNet/IP and
back location cable
entry
3m OS32C-BP-DM
4m
OS32C-BP-DM-4M
OS32C with
EtherNet/IP and side
location cable entry
*
3m OS32C-SP1-DM
4m
OS32C-SP1-DM-4M