Datasheet

OS32C
20
Safety Precautions
Description shown below is only a guideline to choose a safety laser scanner.
To use the product properly, you must read the instruction manual that comes with the product.
1.
Application of an OS32C sensor by itself cannot receive the type
approval provided by Article 44-2 of the Labor Safety and Health Law
of Japan. It is necessary to apply it as a system. Therefore, when
using this product in Japan as a "safety system for presses and
shearing machines" as prescribed in Article 42 of the Labor Safety
and Health Law, the complete system must receive the type approval.
2. (1) This product is electro-sensitive protective equipment (ESPE)
in accordance with European Union (EU) Machinery Directive
Annex V, Item 2.
(2) This product complies with the following legislation and standards:
1) EU legislation Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Low Voltage Directive (2006/95/EC)
RoHS Directive (2002/95/EC)
2) European & EN 61496-1 (Type 3 ESPE)
International EN 62061
Standards EN 50178
EN ISO 13849-1
IEC 61496-3 (Type 3 AOPDDR)
IEC 61508, Parts 1-7 (SIL-2)
EN 60204-1
3) North American Standards: per UL File E241445, US and C-
UL approvals (CNN: NIPM/NIPM7).
• ANSI/UL 508 (Industrial Control Equipment)
• ANSI B11.19
• ANSI/RIA R15.06
• NFPA 79
• Code of Federal Regulations CFR29
• IEC 61496-1 (Type 3 ESPE)
• IEC 61496-3 (Type 3 AOPDDR)
• UL 1998 (Software in Programmable Components)
• IEC 61508 (Functional Safety of Electrical/Electronic/
Programmable Electronic Safety-Related Systems)
• IEC 61508-3 (Functional Safety of Electrical/Electronic/
Programmable Electronic Safety-Related Systems - Part 3:
Software Requirements)
• CAN/CSA-C22.2 No. 14 (Industrial Control Equipment)
• CAN/CSA-C22.2 No. 0.8 (Safety Functions Incorporating
Electronic Technology)
4) JIS standards JIS B 9704-1
JIS B 9704-3 (Type3 ESPE)
(3) This product received the following approvals from TÜV
Rheinland of the EU.
• EC Type-Examination in accordance with the EU Machinery
Directive,
Type 3 ESPE (IEC61496-1),
Type 3 AOPDDR (IEC61496-3)
The Alert symbols and their meanings ensure safe use of
the products
In order to use the OS32C safely, the precautions listed in this manual are
indicated by alert symbols. The descriptions must be followed, failure to
follow all precautions and alerts may result in an unsafe installation or
operation. The following indictions and symbols are used.
Meanings of Alert Symbols
An OS32C is an electro-sensitive protective equipment
designed to guard personnel working around
hazardous machinery.
Whether a specific machine application and the OS32C
system installation complies with safety regulations
depends on the proper application, installation,
maintenance and operation of the OS32C system.
These items are the responsibility of the purchaser, installer and
user.
User
The administrator is responsible for the selection and
training of personnel to properly install, operate, and
maintain the machine and its safeguarding systems.
An OS32C system should only be installed, verified
and maintained by a qualified person. A qualifed
person is defined as “an individual who understands,
is trained on, and demonstrates competence with the
construction, operation or maintenance of the machinery and
the hazards involved.” (ANSI/PMMI B155.1-2006)
The machine requirements
The guarded machine must be able to stop anywhere
in its cycle. Do not use an OS32C on a press with a full-
revolution clutch.
The guarded machine must have a consistent stopping time
and adequate control mechanisms.
Legislation and Standards Safety Precautions
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious
injury or death. Additionally there may be
significant property damage.
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or there may be property
damage.
Indicates prohibited actions.
Indicates mandatory actions.
WARNING
WARNING
WARNING
WARNING
CAUTION