Datasheet

OS32C
17
Back View
Side View
Bottom View
50.0 [1.97]
39.9 [1.57]
124.9 [4.92]
75.2
[2.96]
107.5 [4.24]
12.2 [0.48]
79.2 [3.12]
Scan Plane
93.7 [3.69]
103.7 [4.08]
97.7 [3.85]
24.5 [0.97]
4.9 [0.19]
37.9 [1.49]
154.7 [6.09]
102.4 [4.03]
144.4 [5.69]
23.3 [0.92]
66.4 [2.62]
54.5 [2.15]
106.0 [4.17]
155.9 [6.14]
23.3 [0.92]
41.0 [1.62]
4.8 [0.19]
3-6.4 [0.25] dia.
4-5.3 [0.21] dia.
OS32C with Bottom/Side Mounting Brackets and Top Guard Kit
OS32C-BP/OS32C-BP-DM/OS32C-BP-4M/OS32C-BP-DM-4M
+ OS32C-BKT1 + OS32C-BKT4
6.4 [0.25]
Back View
(For back mounting)
Bottom View
Side View
Back View
(For Y-anglular adjustment)
132.7 [5.23]
48.0 [1.89]
93.5 [3.68]
150.5 [5.93]
50.0 [1.97]
55.9 [2.20]
15.0
°
42.2 [1.66]
17.4 [0.69]
166.3
[6.55]
151.1
[5.95]
54.5 [2.15] 37.0 [1.46]
102.4
[4.03]
163.0
[6.42]
163.7 [6.45]
46.0 [1.81]
111. 4 [4.39]
99.2
[3.91]
43.0
[1.69]
15.0
°
7.5°
28.2 [1.11]
95.2 [3.75]
Scan plane
119.7 [4.72]
7.5
°
Hardware for
Y-adjustment
17.0
[0.67]
4-5.3 [0.21] dia.
For Y-angular adjustment
(x3) slots
Use M6 hex head screws,
split and flat washers
hardware user supplied
In order to comply with Section 4.2.16 of IEC 61496-3, when the OS32C is mounted where the scanner position could change (e.g. as the result of an impact),
additional mechanical means, such as serrated or toothed lock washers, must be employed in the mounting hardware.
R47.5 [1.87]
2-R72 [2.83]
4-5.3 [0.21] dia.
OS32C with Bottom/Side Mounting Brackets and XY Axis Rotation Mounting Kit
OS32C-BP/OS32C-BP-DM/OS32C-BP-4M/OS32C-BP-DM-4M
+ OS32C-BKT1 + OS32C-BKT2