Datasheet
Machine Automation Controller NX1P
8
Temperature Input Units
*1. The resolution is 0.2°C max. when the input type is R, S, or W.
*2. The NX-TS2202 and NX-TS3202 only supports Pt100 three-wire sensor.
Heater Burnout Detection Units
Load Cell Input Unit
* Refer to the NX-series Load Cell Input Unit User’s Manual (W565) for detailed information on I/O refresh cycle.
Product
Name
Specification
Model
Standards
Number
of points
Input type
Resolution
(25°C)
Over all accuracy (25°C)
Conversion
time
I/O refreshing
method
Terminals
Thermocouple
Input type
2 points
Thermocouple
0.1°C max.
*1
Refer to the
Reference
accuracy and
temperature coefficient
according to the input
type and measurement
temperature of NX-series
Temperature Input Unit
in the
Sysmac Integrated
Catalog
(Cat. No. P072).
250 ms/
Unit
Free-Run
refreshing
16 Terminals NX-TS2101
UC1, N, L,
CE, RCM,
KC
4 points 16 Terminals
x 2 NX-TS3101
2 points
0.01°C max.
10 ms/
Unit
16 Terminals NX-TS2102
4 points 16 Terminals x 2 NX-TS3102
2 points
0.001°C max.
60 ms/
Unit
16 Terminals NX-TS2104
4 points 16 Terminals x 2 NX-TS3104
Resistance
Thermometer
Input type
2 points
Resistance
Thermometer
(Pt100/Pt1000,
three-wire) *2
0.1°C max.
250 ms/
Unit
16 Terminals NX-TS2201
4 points 16 Terminals x 2 NX-TS3201
2 points
0.01°C max.
10 ms/
Unit
16 Terminals NX-TS2202
4 points 16 Terminals x 2 NX-TS3202
2 points
0.001°C max.
60 ms/
Unit
16 Terminals NX-TS2204
4 points 16 Terminals x 2 NX-TS3204
Product Name
Specification
Model
Standards
CT input section Control output section
Number of
inputs
Maximum
heater
current
Number of
outputs
Internal I/O
common
Maximum
load current
Rated
voltage
I/O refreshing
method
Heater Burnout
Detection Unit
450 AAC 4
NPN
0.1 A/point,
0.4 A/Unit
12 to
24 VDC
Free-Run
refreshing
NX-HB3101
UC1, N,
CE, RCM,
KC
PNP 24 VDC NX-HB3201
Product Name
Specification
Model
Standards
Number of Model
Standards points
Conversion
cycle
I/O refreshing method *
Load cell excitation
voltage
Input range
Load Cell Input
Unit
1 125 μs
• Free-Run refreshing
• Synchronous I/O refreshing
• Task period prioritized refreshing
5 VDC ± 10% -5.0 to 5.0 mV/V NX-RS1201
UC1, N,
CE, RCM,
KC