Datasheet

Machine Automation Controller NX1P
4
NX Units
Up to eight NX Units can be connected to an NX1P2 CPU Unit.
Digital Input Units
* To use input refreshing with input changed time, the EtherCAT Coupler Unit with unit version 1.1 or later and the Sysmac Studio version 1.07 or
higher are required.
Product Name
Specification
Model Standards
Number
of points
Internal I/O
common
Rated input
voltage
I/O refreshing method
ON/OFF
response time
DC Input Unit
(Screwless Clamping
Terminal Block,
12 mm Width)
4 points
NPN
12 to 24 VDC
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max. NX-ID3317
UC1,
N, L,
CE, RCM,
KC
24 VDC
100 ns max./100 ns max.
NX-ID3343
Input refreshing with input changed
time only *
NX-ID3344
PNP
12 to 24 VDC
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max. NX-ID3417
24 VDC
100 ns max./100 ns max.
NX-ID3443
Input refreshing with input changed
time only *
NX-ID3444
8 points
NPN
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max.
NX-ID4342
PNP NX-ID4442
16 points
NPN NX-ID5342
PNP NX-ID5442
DC Input Unit
(M3 Screw Terminal
Block, 30 mm Width)
16 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max. NX-ID5142-1
UC1, N,
CE, RCM,
KC
DC Input Unit
(MIL Connector,
30 mm Width)
16 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max.
NX-ID5142-5
UC1, N,
CE, RCM,
KC
32 points NX-ID6142-5
DC Input Unit
(Fujitsu Connector,
30 mm Width)
32 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O
refreshing and Free-Run refreshing
20 μs max./400 μs max. NX-ID6142-6
UC1, N,
CE, RCM,
KC
AC Input Unit
(Screwless Clamping
Terminal Block,
12 mm Width)
4 points
200 to 240 VAC, 50/60 Hz
(170 to 264 VAC, ±3 Hz)
Free-Run refreshing 10 ms max./40 ms max. NX-IA3117
UC1, N,
CE, RCM,
KC