Datasheet
Machine Automation Controller NX1P
37
Related Manuals
Manual name Cat. No. Model numbers Application Description
NX-series NX1P2
CPU Unit Hardware
User’s Manual
W578 NX1P2-
Learning the basic specifications of
the NX-series NX1P2 CPU Units,
including introductory information,
designing, installation, and
maintenance.
Mainly hardware information is
provided.
An introduction to the entire NX1P2 CPU Unit system is
provided along with the following information on the
NX1P2 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Built-in I/O and Option Board
User's Manual
W579 NX1P2-
Learning about the details of
functions only for an NX-series
NX1P2 CPU Unit and an
introduction of functions for an NJ/
NX-series CPU Unit.
Of the functions for an NX1P2 CPU Unit, the following
information is provided.
• Built-in I/O
• Serial Communication Option Boards
• Analog I/O Option Boards
An introduction of following functions for an NJ/NX-
series CPU Unit is also provided.
• Motion control functions
• EtherNet/IP communications functions
• EtherCAT communications functions
NJ/NX-series
CPU Unit Software
User’s Manual
W501
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning how to program and set
up an NJ/NX-series CPU Unit.
Mainly software information is
provided.
The following information is provided on a Controller
built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
NJ/NX-series
Instructions Reference
Manual
W502
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning detailed specifications on
the basic instructions of an NJ/NX-
series CPU Unit.
The instructions in the instruction set (IEC 61131-3
specifications) are described.
NJ/NX-series
CPU Unit Motion Control
User’s Manual
W507
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about motion control
settings and programming
concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-
NJ501-
NJ3
01-
NJ101-
NX1P2-
Learning about the specifications
of the motion control instructions.
The motion control instructions are described.
NJ/NX-series
CPU Unit Built-in EtherCAT
®
Port
User’s Manual
W505
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Using the built-in EtherCAT port on
an NJ/NX-series CPU Unit.
Information on the built-in EtherCAT port is provided.
This manual provides an introduction and provides
information on the configuration, features, and setup.
NJ/NX-series CPU Unit
Built-in EtherNet/IP™ port
User’s Manual
W506
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Using the built-in EtherNet/IP port
on an NJ/NX-series CPU Unit.
Information on the built-in EtherNet/IP port is provided.
Information is provided on the basic setup, tag data
links, and other features.
NJ/NX-series
Troubleshooting Manual
W503
NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about the errors that may
be detected in an NJ/NX-series
Controller.
Describes concepts on managing errors that may be
detected in an NJ/NX-series Controller and information
on individual errors.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC-SE2
Learning about the operating
procedures and functions of the
Sysmac Studio.
Describes the operating procedures of the Sysmac
Studio.
NX-series
EtherCAT
®
Coupler Unit
User’s Manual
W519 NX-ECC20
Leaning how to use an NX-series
EtherCAT Coupler Unit and
EtherCAT Slave Terminals
The following items are described: the overall system
and configuration methods of an EtherCAT Slave
Terminal (which consists of an NX-series EtherCAT
Coupler Unit and NX Units), and information on
hardware, setup, and functions to set up, control, and
monitor NX Units through EtherCAT.
NX-series
Data Reference Manual
W525 NX-
Referencing lists of the data that is
required to configure systems with
NX-series Units
Lists of the power consumptions, weights, and other NX
Unit data that is required to configure systems with NX-
series Units are provided.