Datasheet

9
NX-SL/SI/SO
Version Information
The combinations that can be used of the unit versions of the Safety Control Units,
NJ/NX-series CPU Units, and NX-series EtherCAT Coupler Unit, and the version of the
Sysmac Studio
* Some Units do not have all of the versions given in the above table.
If a Unit does not have the specified version, support is provided by the oldest available version after the specified version.
Refer to the user’s manuals for the specific Units for the relation between models and versions.
NX Unit Corresponding version *
Model number
Unit
version
EtherCAT Coupler Unit
NX-ECC20@
NJ/NX-series CPU Units Sysmac Studio
ErherNet/IP
Coupler Unit
(NX-EIC202)
Sysmac Studio
NX-SL3300
1.0
1.1 or later 1.06 or later
1.07 or later --- ---
1.1 1.10 or later 1.0 or later 1.10 or later
NX-SL3500
1.0
1.2 or later 1.07 or later
1.08 or later --- ---
1.1 1.10 or later --- ---
NX-SIH400
1.0
1.1 or later 1.06 or later
1.07 or later --- ---
1.1 1.10 or later
1.0 or later 1.10 or later
NX-SID800
1.0 1.07 or laterNX-SOH200
NX-SOD400