Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationI/O Interface Module 2DI 2DO 28.8VDC

327IO-Link

GX-ILM@, NX-ILM@

IO-Link

IO-Link makes communication down to the

sensor level visible

• Machine downtime can be reduced

• Abnormality detection for shortest recovery

• Condition monitoring for predictive maintenance

• Individual identification for reduction of man hours

• Master unit with screw-less terminal block or with

IP67 protection class for watery and dusty environ-

ments

• Up to 8 sensors can be connected with one IO-Link

master unit

• Photoelectric and Proximity sensors

System configuration

NX7/NJ series

Machine automation controller

Sysmac Studio

IoT

MES/ERP, SQL database server

FACTORY AUTOMATION

NETWORK

REAL-TIME MACHINE

CONTROL

INTELLIGENT SENSORS/

ACTUATORS

GX-series IO-Link

master unit

NX-series IO-Link

master unit

Photoelectric and

Proximity sensors

Up to 8 sensors

Up to 4 sensors

Summary of content (10 pages)

PAGE 1
GX-ILM@, NX-ILM@ IO-Link IO-Link makes communication down to the sensor level visible • • • • • Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive maintenance Individual identification for reduction of man hours Master unit with screw-less terminal block or with IP67 protection class for watery and dusty environments • Up to 8 sensors can be connected with one IO-Link master unit • Photoelectric and Proximity sensors System configuration FACTOR
PAGE 2
Specifications NX-series IO-Link master unit Model NX-ILM400 Product family NX-series Number of ports Communication specifications 4 Protocol IO-Link protocol Baud rate COM1: 4.8 kbps / COM2: 38.4 kbps / COM3: 230.4 kbps Topology 1:1 Compliant standards • IO-Link Interface and System Specification Version 1.12 • IO-Link Test Specification Version 1.12 Power supply to devices Rated voltage in IO-Link mode or SIO Max. load current (DI) mode Short-circuit protection 24 VDC (20.4 to 28.
PAGE 3
GX-series IO-Link master unit Model GX-ILM08C Product family GX-series Number of ports Communication specifications 8 Protocol IO-Link protocol Baud rate COM1: 4.8 kbps / COM2: 38.4 kbps / COM3: 230.4 kbps Topology 1:1 Compliant standards • IO-Link Interface and System Specification Version 1.12 • IO-Link Test Specification Version 1.12 Power supply to devices Rated voltage in IO-Link mode or SIO Max. load current (DI) mode Short-circuit protection 24 VDC (20.4 to 26.
PAGE 4
C/Q DI L+ Terminal wiring NX-ILM400 NX-ILM400 IO-Link master unit IO-Link circuits Internal circuits Terminal block Circuit layout LLeft-side I/O power supply + NX bus connector I/O power supply - NX-ILM004 I/O power supply + Right-side NX bus I/O power supply - connector A1 P1_C/Q P1_DI P1_L+ B1 P2_C/Q P2_DI P2_L+ P1_LP3_C/Q P3_DI P3_L+ P3_LA8 P2_LP4_C/Q P4_DI P4_L+ P4_LB8 IO-Link sensor with DI input 1 Brown 4 Black 2 White 3 Blue IO-Link sensor without DI input 1 Brown 4 Black 3 Blue GX
PAGE 5
Nomenclature/Dimensions NX-ILM400 14.1 12.0 1.5 A 100 C 104.5 B 1.5 65.2 71 80.1 Symbol Name NX bus connector A Description This connector is used to connect each unit. B Indicators The indicators show the current operating status of the unit. C Terminal block The terminal block is used to connect external devices. The number of terminals depends on the type of unit.
PAGE 6
Ordering information IO-Link master unit Item IO-Link ports Connection type Degree of protection Model NX-series IO-Link master unit*1 4 Screwless push-in (NX-TBA162) IP20 NX-ILM400 GX-series IO-Link master unit 8 M12 Smartclick connector IP67 GX-ILM08C *1 Appearance EtherCAT communication coupler unit NX-ECC2@@ is necessary for the system configuration.
PAGE 7
Photoelectric sensor Sensing method Sensing distance Connection method Baud rate Model (PNP) Through-beam (emitter + receiver)*1 15 m Pre-wired (2 m) COM2 E3Z-T81-IL2 2M Pre-wired M12 connector E3Z-T81-M1TJ-IL2 0.
PAGE 8
Mounting brackets (Not provided with sensors. Order a mounting bracket separately if required) Item Material Model Mounting brackets SUS304 E39-L153*1 Appearance E39-L104*1 Horizontal mounting brackets E39-L43*2 Horizontal protective cover bracket E39-L142*2 Rear mounting bracket E39-L44 Metal protective cover bracket E39-L98*2 Sensor adjuster (for left to right adjustment) E39-L150 Easily mounted to the aluminum frame rails of conveyors and easily adjusted.
PAGE 9
Sensor I/O connectors for color mark photoelectric sensor (Required for a sensor with a connector. Connectors are not provided with the sensors.
PAGE 10
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. SysCat_I191E-EN-01A 336 In the interest of product improvement, specifications are subject to change without notice.