Datasheet

NX-EIC
11
Ordering Information
International Standards
• The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division
2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, CE: EC Directives, and KC: KC Registration.
• Contact your OMRON representative for further details and applicable conditions for these standards.
Automation Software Sysmac Studio
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available
individually. Each model of licenses does not include any DVD.
*1. The Sysmac Studio Standard Edition with license(s) (SYSMAC-SE@@@L) provides functions of the NX-I/O Edition (SYSMAC-NE001L).
*2. With the Sysmac Studio Standard Edition with license(s) (SYSMAC-SE@@@L) version 1.10 or higher, you can use the setup functions for the
EtherNet/IP Coupler.
Unit type Product Name Current consumption
Maximum I/O
power supply
current
Model Standards
NX Series
EtherCAT Coupler Unit
EtherNet/IP Coupler Unit
1.60 W or lower 10 A NX-EIC202 UC1, CE, KC
Product name Specifications Model Standards
Number of
licenses
Media
Sysmac Studio
NX-I/O Edition
Ver.1.@@ *1 *2
Sysmac Studio NX-I/O Edition is a limited license that
provides selected functions required for EtherNet/IP
Coupler settings.
Because this product is a license only, you need the
Sysmac Studio Standard Edition DVD media to install
it.
1 license
--- SYSMAC-NE001L ---
Sysmac Studio
Standard Edition
Ver.1.@@ *2
The Sysmac Studio is the software that provides an
integrated environment for setting, programming,
debugging and maintenance of machine automation
controllers including the NJ Series, EtherCat Slave,
and the HMI.
Sysmac Studio runs on the following OS.
Windows XP (Service Pack 3 or higher, 32-bit version)/
Windows Vista (32-bit version)/Windows 7 (32-bit/64-
bit version)/Windows 8 (32-bit/64-bit version)/
Windows 8.1 (32-bit/64-bit version)/ Windows 10 (32-
bit/64-bit version)
This software provides functions of the Vision Edition.
Refer to Sysmac Catalog (P072) for details such as
supported models and functions.
---
(Media only)
DVD SYSMAC-SE200D ---