Datasheet

50 Remote I/O
Position interface
Load cell input
Safety
Communication interface unit
Power/System unit
Accessories
Type Channels, signal type I/O refresh method Connection type
*1
*1. Units with Screwless push-in connections are supplied with the appropriate terminal connector. Units with MIL connectors are supplied without matching plugs.
Width Model NPN type
*2
*2. Model codes are for PNP type signals (positive switching, 0 V common). Most models are also available as NPN type (negative switching, 24 V common). Inputs of
MIL connector versions can be used as NPN or PNP.
Encoder input 1 SSI encoder, 2 MHz Synchronous/free run Screwless push-in (NX-TBA122) 12 mm NX-ECS112 -
2 SSI encoders, 2 MHz Screwless push-in (NX-TBA122) 12 mm NX-ECS212 -
1 incremental encoder line driver
4 MHz + 3 digital inputs (1 s)
Screwless push-in (NX-TBA122
+ NX-TBB122)
24 mm NX-EC0142 NX-EC0132
1 incremental encoder open collec-
tor 500 kHz + 3 digital inputs (1 s)
Screwless push-in (NX-TBA162) 12 mm NX-EC0122 NX-EC0112
2 incremental encoders open col-
lector 500 kHz
Screwless push-in (NX-TBA122) 12 mm NX-EC0222 NX-EC0212
Pulse output 1 pulse open collector 500 kHz + 2
digital inputs + 1 digital output
Synchronous Screwless push-in (NX-TBA162) 12 mm NX-PG0122 NX-PG0112
2 pulse line driver 4 MHz + 5 digital
inputs per channel + 3 digital out-
puts per channel
1 x 34-pin MIL connector 30 mm NX-PG0242-5 NX-PG0232-5
4 pulse line driver 4 MHz + 5 digital
inputs per channel + 3 digital out-
puts per channel
2 x 34-pin MIL connector 30 mm NX-PG0342-5 NX-PG0332-5
Type Specifications I/O refresh method Excitation voltage/Input
range
Connection type
*1
*1. Units with Screwless push-in connections are supplied with the appropriate terminal connector.
Width Model
Load cell input 1 load cell input, 125 s
conversion cycle
Synchronous/free run 5 VDC ±10%/-5 to 5 mV/V Screwless push-in (NX-TBC162) 12 mm NX-RS1201
Type Specifications Performance, I/O refresh method Connection type
*1
*1. Units with Screwless push-in connections are supplied with the appropriate terminal connector.
Note: For more detailed information about safety units, refer to “NX integrated safety datasheet (I183E-EN)” and “NX safety standalone datasheet (I185E-EN)”.
Width Model
Safety controller FSoE protocol For up to 1,024 safety I/O points 128 safety connections 30 mm NX-SL3500
For up to 256 safety I/O points 32 safety connections 30 mm NX-SL3300
Safety input 4 inputs + 2 test outputs Free run Screwless push-in (NX-TBA082) 12 mm NX-SIH400
8 inputs + 2 test outputs Screwless push-in (NX-TBA162) 12 mm NX-SID800
Safety output 2 outputs, 2.0 A Screwless push-in (NX-TBA082) 12 mm NX-SOH200
4 outputs, 0.5 A Screwless push-in (NX-TBA082) 12 mm NX-SOD400
Type Serial interface No. of serial ports Connection type
*1
*1. Units with Screwless push-in connections are supplied with the appropriate terminal connector.
Width Model
Communication interface RS-232C 1 Screwless push-in (NX-TBC162) 12 mm NX-CIF101
2 D-Sub 9pin connector 30 mm NX-CIF210
RS-422A/485 1 Screwless push-in (NX-TBC162) 12 mm NX-CIF105
Type Description Connection type
*1
*1. Units with Screwless push-in connections are supplied with the appropriate terminal connector.
Width Model
NX bus power supply unit 24 VDC input, non-isolated Screwless push-in (NX-TBC082) 12 mm NX-PD1000
I/O power feed unit For separation of groups, up to 4 A Screwless push-in (NX-TBA082) 12 mm NX-PF0630
For separation of groups, up to 10 A Screwless push-in (NX-TBA082) 12 mm NX-PF0730
I/O power supply connection unit 16 × IOV Screwless push-in (NX-TBA162) 12 mm NX-PC0020
16 × IOG Screwless push-in (NX-TBA162) 12 mm NX-PC0010
8 × IOV + 8 × IOG Screwless push-in (NX-TBA162) 12 mm NX-PC0030
Shield connection unit Grounding terminal, 16 points Screwless push-in (NX-TBC162) 12 mm NX-TBX01
Type Description Connection type Width Model
End cover Included with communication coupler - 12 mm NX-END01
Terminal block (replacement front
connector)
With 8 wiring terminals (A + B) Screwless push-in 12 mm NX-TBA082
With 8 wiring terminals (A + B with FG) 12 mm NX-TBC082
With 12 wiring terminals (A + B) 12 mm NX-TBA122
With 12 wiring terminals (C + D) 12 mm NX-TBB122
With 16 wiring terminals (A + B) 12 mm NX-TBA162
With 16 wiring terminals (C + D) 12 mm NX-TBB162
With 16 wiring terminals (A + B with FG) 12 mm NX-TBC162
DIN rail insulation spacers Set of 3 pcs - - NX-AUX01
Terminal block coding pins For 10 units (Terminal block: 30 pins, unit: 30 pins) - - NX-AUX02
End plate To secure the units on the DIN track - - PFP-M