Datasheet

18
Multifunction execution with one object
Easy On-screen Setup with Support Software!
Touch
ON!
Touch
Delay: 0.5 to 15 s
Acceptance time: 0.5 to 30 s
ON!
Touch Touch
Touc
h
ouch
OFF!
Touch
ouch
To
u
ch
ouch
Delay: 0.5 to 15 s
Multiple functions
Execute up to 32 functions with one Multifunction Object
Multifunction Objects support Write Bit, Write Word,
object control, and etc
Multifunction Objects combine the functions of multiple objects into one object.
Multiple functions can be executed by pressing one button without using
troublesome macros. Setup is easy. For example, a setting can be made
on-screen using the Support Software to turn ON a bit to start a machine, set a
value, and then change the screen.
Multifunction Objects support four useful functions
Switches that do not immediately operate when touched can be
easily made without ladder programming.
Turns ON when the button is pressed for at least a specified time.
Button pressed
Relay status
Button pressed
Relay status
Button pressed
Relay status
ON delay
Double-press
Integration
Simultaneous
pressing prohibited
OFF delay
Turns ON when the button is pressed twice within the specified time.
Turns OFF after a specified time lapses after the button is released.
Time the button is pressed.
Time the button is not pressed.
Does not turn ON when the button is pressed at the same time as another button.
Execute multiple functions with one button.
The screen changes.
The word is set.
The bit turns ON.
Example: