Datasheet

NS Series
36
Software
●How to select required support software for your controller
The required support software depends on the controller to connect. Please check the following table when purchasing the support software.
●FA Integrated Tool Package CX-One
*1. Multi licenses are available for the CX-One (3, 10, 30, or 50 licenses).
●Automation Software Sysmac Studio
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available
individually. Each model of licenses does not include any DVD.
Note: To connect the NJ-series Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is also required.
* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
Item Omron PLC System Omron Machine Automation Controller System
Controller CS, CJ, CP, and other series NJ-series
Programmable Terminals NS-series NS-series with an Ethernet port
Software FA Integrated Tool Package CX-One Automation Software Sysmac Studio
Product name Model Standards
Specifications Number of
licenses
Media
FA Integrated
Tool Package
CX-One Ver.4.@
The CX-One is a comprehensive software package that integrates Support
Software for OMRON PLCs and components.
CX-One runs on the following OS.
Windows XP (Service Pack 3 or higher), Vista or 7
Note: Except for Windows XP 64-bit version
CX-One Version 4.@ includes CX-Designer Ver.3.@.
For details, refer to the CX-One catalog (Cat. No. R134)
license
*1
DVD CX-ONE-AL01-EV4 ---
Product name
Specifications
Model Standards
Number of
licenses
Media
Sysmac Studio
Standard Edition
Ver.1.@
The Sysmac Studio provides an integrated development environment to set up,
program, debug, and maintain NJ-series Controllers and other Machine
Automation Controllers, as well as EtherCAT slaves.
Sysmac Studio runs on the following OS.
Windows XP (Service Pack 3 or higher, 32-bit version) /Vista (32-bit version) /7
(32-bit/64-bit version)
The Sysmac Studio Standard Edition DVD includes support software to set up
EtherNet/IP Units, DeviceNet slaves, Serial Communications Units and support
software for creating screens on HMIs (CX-Designer).
For details, refer to the Sysmac Integrated Catalogue (P072).
- (Media only) DVD SYSMAC-SE200D ---
1 license* --- SYSMAC-SE201L ---
NS Series
37
Cable
*1. Use a standard USB Type A male to Type B type male cable to connect the NS series PT to a personal computer (CX-Designer).
Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends on the printer.
*2. To connect the NS series PT to NJ series controller, using a commercially available 10/100-BASE-TX twisted-pair cable.
For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).
Product name Specifications Model Standards
Cable *1
Screen transfer cable for DOS/V (CX-Designer  PT) Length: 2 m XW2Z-S002 ---
USB-Serial Conversion cable Length: 0.5 m CS1W-CIF31 N
USB relay cable Length: 1 m NS-USBEXT-1M
---
NSH5 Cables
RS-422A cable (loose wires + D-Sub 9-pin) Length: 10 m NSH5-422CW-10M
RS-232C cable (loose wires + D-Sub 9-pin) Length: 3 m NSH5-232CW-3M
RS-232C cable (loose wires + D-Sub 9-pin) Length: 10 m NSH5-232CW-10M
UL-compliant
NSH5 Cable
RS-422A cable (loose wires) Length: 10 m NSH5-422UL-10M
CURS-232C cable (loose wires + relay cable) Length: 3 m NSH5-232UL-3M
RS-232C cable (loose wires + relay cable) Length: 10 m NSH5-232UL-10M
PT-to-PLC
Connecting Cable *2
PT connection: 9 pins
PLC connection: 9 pins
Length: 2 m XW2Z-200T
---
Length: 5 m XW2Z-500T
PT connection: 9 pins
PLC peripheral port
Length: 2 m XW2Z-200T-2
Length: 5 m XW2Z-500T-2
NSH5 Removable Box
Cable
RS-232C cable (connectors)
Length: 3 m NSH5-232CN-3M
Length: 10 m NSH5-232CN-10M
NSH5 Removable Box --- NSH5-AL001
NSH5 Wall-mounting
Bracket
--- NSH5-ATT02
NSH5 Visor --- NSH5-ATT01
Order/version: 2447841/010 (width: 210mm, height: 297mm)
Print type: NS Brochure - Central Print, Full color, with extra spotcolor(s)
Produced by Adnovate on 03-apr-2012 at 10:46:40 in Adobe InDesign 7.0.4.553
Low resolution proof not suitable for production purposes
Page: 37