Datasheet

HAND-HELD HMI
NSH5 Series
A hand-held version of the NS5 is now available to perform operations at the production site. The NS-series HMI’s have a complete
set of functions that can be used at the production site, such as the SAP Library, multi-language support, and Programming Console
functions.
Function Switches
Use the ten functions
switches. F, F, F, F: Wired
outputs F to F, F to F:
Communications outputs
Memory Card Interface and USB Slave Connector.
Emergency Stop Switch.
PST-NC Structure
DPST-NC: Increase safety (wired outputs). SPST-NC:
Input to internal NSH memory, output to a lamp
for emergency stop switch operation, or output via
communications, e.g., to a PLC.
Water Resistance to IP
The water-resistant structure is equivalent to IP on
all surfaces. The HMI may not be suitable for use in
environments with long-term water exposure.
HMI and Cable Sold Separately
Select the Cable according to the application
(RS-C/RS-A). Connector-loose wires, UL
connector,  m or  m.
-Position Enable Switch
Increased safety with
DPST-NO structure (wired
outputs).
System Configuration
(Removable Box Connected)
Up to eight NSHs can be connected at a time.
PLC
NSH (See note.)
RS-C connection
(Cable length:
 or  m)
Control panel
Removable
Box
RS-A connection (Total cable length:  m max.)
Up to  Removable Boxes.
34
Order/version: 2447841/010 (width: 210mm, height: 297mm)
Print type: NS Brochure - Central Print, Full color, with extra spotcolor(s)
Produced by Adnovate on 03-apr-2012 at 10:46:40 in Adobe InDesign 7.0.4.553
Low resolution proof not suitable for production purposes
Page: 34