Datasheet

Easy installation
To get started, just install the NS-Runtime in the
computer and place the screen data in the applicable
folder. NS/NSJ-series screens and NS-Runtime screens
can all be managed using one single tool.
Note: The NS-Runtime will operate in a computer environment even
if the CX-Designer is not installed. The hardware key (USB dongle)
that is supplied with the NS-Runtime is required for operation.
Application startup function
User applications can be started from NS-Runtime.
Applications can be started simply by pressing
buttons on the screen.
Note : If the screen data is converted from the NS Series,
NS-Series HMI system versions must be . or lower.
Note : Do not use this product for -hour operation in an FA
environment. Omron shall not be responsible if the
computer or application does not operate properly due
to noise or other causes. Omron shall not be responsible
for any problems that may be caused by any applications
other than Omron products.
NS-Runtime
NS-Runtime
Screen data
Screen designer: CX-Designer (CX-One)
For example, to start an
application by pressing a
button… Use the EXEC( )
macro.
Example: EXEC(“C:ProgramFiles\Micros..\EXCEL.
EXEC:\..\TEST.xls…..);
Note: As much as possible, keep applications closed that
are not required for operation.
Recipe handling
Checking machine data or switching processes from a host
computer is easy. Parameter groups in the PLC can be transferred
together to a computer, and the transferred data can be checked
and edited in CSV format, e.g., using Excel. The edited data can
then be transferred together back to the PLC.
CSV
format
Recipe data
33
Order/version: 2447841/010 (width: 210mm, height: 297mm)
Print type: NS Brochure - Central Print, Full color, with extra spotcolor(s)
Produced by Adnovate on 03-apr-2012 at 10:46:40 in Adobe InDesign 7.0.4.553
Low resolution proof not suitable for production purposes
Page: 33