Datasheet

Reading the symbol table
The symbol table created in the CX-Programmer
during ladder programming can be read into the
CX-Designer by dragging and dropping, so it isn’t
necessary to manually enter data such as input
addresses and I/O comments. Tags (i.e., network
symbols) can also be read into the CX-Designer.
Example of Reading the Symbol Table
The symbol table read from the CX-Programmer can be
directly dragged and dropped to the touch switch and lamp.
Example of reading I/O comments
If Use I/O comment is selected in advance for the Use symbol
text as label, the I/O comments are automatically used as
labels when addresses are dragged and dropped from the
symbol table. (If Use symbol names is selected, the symbol
names are used as the labels.)
Example of easy address allocation
CX-Programmer’s
symbol table
The CX-Programmer’s
symbol table can be
dragged and dropped!
() Create a switch on the screen.
() Allocations for buttons and lamps
can also be checked on the screen
using comments imported from the
CX-Programmer.
() Check the comment then drag-and-drop the symbol from the symbol
table to the property list.
The I/O comment is used as the label.
CX-Designer’s
symbol table
Drag &
Drop
Drag &
Drop
Drag &
Drop
23
Order/version: 2447841/010 (width: 210mm, height: 297mm)
Print type: NS Brochure - Central Print, Full color, with extra spotcolor(s)
Produced by Adnovate on 03-apr-2012 at 10:46:40 in Adobe InDesign 7.0.4.553
Low resolution proof not suitable for production purposes
Page: 23