Datasheet

DESIGN
EtherNet/IP
Support for data structures This special feature is
made possible by combining an Omron CJ2 PLC with an
NS-series HMI. The data structures that you define on the
Programming Tool can be used on the CX-Designer simply
by dragging and dropping them.
Drag &
Drop
EtherNet/IP
CJ/NJ
NS Series
CX-Designer
Programming Tool
Tag access
A tag is a name given to an address. Tags are managed in the CJ2 CPU Unit, where
they are defined as network symbols. The common user-defined tag names are
used from programmable terminals and host applications to access memory in a
CJ2 CPU Unit without knowing the physical address.
. Tag names are managed at the PLC with
the CX-Programmer.
Tag name
Number_
produced
Number_produced
Number_produced
Number_produced
Address
D
. For example, create screens with tag names without
typing the physical address.
Host application
. All devices will access with
Common “Tag”
Accessed by
tag name.
Data links
NS Series
CJ/NJ CJ/NJ
14
Order/version: 2447841/010 (width: 210mm, height: 297mm)
Print type: NS Brochure - Central Print, Full color, with extra spotcolor(s)
Produced by Adnovate on 03-apr-2012 at 10:46:40 in Adobe InDesign 7.0.4.553
Low resolution proof not suitable for production purposes
Page: 14