Datasheet

M2BJ
2
Ordering Information
*1.High-sound models incorporate an LED, which lights when the Buzzer sounds.
*2.Refer to “Short-circuiting Jumper (M2BJ-BTH)” on page 5 for the insert direction of the jumper.
External Signal Selection Model
(M2BJ-BH24D-DA)
• An external signal selection model is also available. With this model, it is possible to switch between continuous and intermittent sound using an
external signal instead of the jumper.
Appearance
Standard sound High sound *1
w/jumper direction A *2 Intermittent
Intermittent
(short)
Intermittent
(high-pitched)
Intermittent
(short, high-pitched)
Intermittent
(high-pitched)
Intermittent
(short)
w/jumper direction B *2
(w/o jumper)
Supply voltage
Continuous Intermittent
(long)
Continuous
(high-pitched)
Intermittent
(long, high-pitched)
Continuous Intermittent
(long)
6 VAC/VDC
Model
M2BJ-B06 M2BJ-B06A M2BJ-B06B M2BJ-B06C M2BJ-BH06D M2BJ-BH06E
12 to 24 VAC/VDC M2BJ-B24 M2BJ-B24A M2BJ-B24B M2BJ-B24C M2BJ-BH24D M2BJ-BH24E
12 to 24 VDC M2BJ-B24-D --- M2BJ-B24B-D --- M2BJ-BH24D-D M2BJ-BH24E-D
123
SW
A
B
M2BJ-BH24D-DA
Note: 1. Ensure that voltage is not applied simultaneously between terminals 1, 2, and 3.
2. Check the power supply polarity. Connecting with the polarity reversed may result in damage.
Switch direction Sound
When switch A is ON
(when terminals 1 and 2 are ON)
Intermittent beeps
When switch B is ON
(when terminals 2 and 3 are ON)
Continuous beep