Datasheet
K6CM
8
Input part
Vibration & temperature sensor
Ratings
Characteristics
Item Model K6CM-VBS1
Power supply voltage Supplied from K6CM-VBM
Sensor head Max. acceleration 10 G
Ambient operating temperature
Pre-amplifier: -10 to +55°C (with no condensation or icing)
Sensor head: -10 to +80°C (with no condensation or icing)
Storage temperature
Pre-amplifier: -20 to +65°C (with no condensation or icing)
Sensor head: -20 to +90°C (with no condensation or icing)
Ambient operating humidity 25% to 85% RH (with no condensation)
Storage humidity 25% to 85% RH (with no condensation)
Altitude 2,000 m max.
Case color
Pre-amplifier: Black
Sensor head: Silver
Case material
Pre-amplifier: Polycarbonate UL94-V0
Sensor head: Aluminum alloy (ADC12) / Zinc die casting (ZDC2) (the threaded part is Steel (S45C))
Weight
Pre-amplifier: Approx. 210 g (including cables)
Sensor head: Approx. 40 g (including cables)
Mounting
Pre-amplifier: DIN rail mounting, screw mounting
Sensor head: Screw mounting
Between pre-amplifier and sensor head: Connector connection (smart click connector)
Wire length
Between pre-amplifier and sensor head: 2.6 m+0.3 m (cannot be extended)
Between pre-amplifier and main unit: 1 m Can be extended up to a maximum length of 100 m
Item Model K6CM-VBS1
Measurement range Specified in main unit “Characteristics”
Applicable
standards
Conforming
standards
EN 61010-2-030
Installation environment: Pollution degree 2, overvoltage category II, measurement category II
EMC EN 61326-1 (EMI: Class A EMS: Industrial Location)
Safety standards
UL 61010-2-030 (listing)
RCM
EAC
Insulation resistance 20 MΩ min.
Dielectric strength 500 VAC for one minute
Vibration
resistance
Pre-amplifier Vibration frequency 10 to 55 Hz, slice amplitude 0.35 mm in each of X, Y, Z directions 5 minute × 10 sweeps
Sensor head Vibration frequency 10 to 55 Hz, slice amplitude 0.35 mm in each of X, Y, Z directions 5 minute × 10 sweeps
Shock resistance
Pre-amplifier 100 m/s
2
, 3 times each in 6 directions along 3 axes
Sensor head 100 m/s
2
, 3 times each in 6 directions along 3 axes
Degree of
protection
Pre-amplifier IP20 (excluding the sensor-side cable)
Sensor head Conforming to IP67G (JIS C 0920 : 2003, Appendix 1)
LED display Pre-amplifier PWR: Green, ERR: Red, COM: Orange