Datasheet

K6CM
4
Ordering Information
List of Models
Input part
Vibration & temperature sensor (Order separately)
Note: The vibration and temperature sensor consists of a sensor head and a pre-amplifier.
A magnet is provided for the easy attachment of the vibration and temperature sensor.
ZCT (IRT) (Order separately)
Note: ZCT (IRT) is the abbreviation for Zero Current Transfer (Insulation Resistance Transfer).
A cable for connection is provided with the ZCT (IRT).
CT (Order separately)
Note: A cable for connection is provided with the CT. Select a CT that sets the current of the applicable motor within the measurement range.
To calculate the current, refer to Comprehensive Current Diagnosis Type Technical Data (Reference) on page 17.
EtherNet/IP communication cable recommended parts
Use a Category 5 or higher STP cable (shielded twisted pair cable).
* It is recommended to use the cable and connector in combination described above.
Monitoring type Power supply voltage Model
Vibration & temperature type
100 to 240 VAC K6CM-VBMA-EIP
24 VAC/VDC K6CM-VBMD-EIP
Insulation resistance type
100 to 240 VAC K6CM-ISMA-EIP
24 VAC/VDC K6CM-ISMD-EIP
Comprehensive current diagnosis type
100 to 240 VAC K6CM-CIMA-EIP
24 VAC/VDC K6CM-CIMD-EIP
Appearance
(pre-amplifier)
Appearance
(head)
Attachment part Applicable Relay Model
M6 screw K6CM-VBM K6CM-VBS1
Rated voltage
Through hole dia.
(mm)
Applicable Relay Model
200 to 480 VAC 52 dia. K6CM-ISM K6CM-ISZBI52
Rated primary-side current Applicable Relay Model
5 A
K6CM-CIM
K6CM-CICB005
25 A K6CM-CICB025
100 A K6CM-CICB100
200 A K6CM-CICB200
400 A K6CM-CICB400
600 A K6CM-CICB600
Part name Manufacturer Model
Cable Hitachi Metals, Ltd. NETSTAR-C5E SA 0.5 × 4P *
RJ45 connector Panduit Corporation MPS588-C *