Datasheet

HL-5000
HL-5000
7
Others
•
Do not use the Limit Switch outdoors, otherwise the Limit Switch
will become damaged by rust or ozone.
• The Limit Switch is not suitable in places exposed to the spray of
rainwater, seawater, or oily water. Consult your OMRON
representative for models resisting rainwater, seawater, and oily
water.
• If high-sealing performance is required along with shielded
wiring or conduit wiring, use the D4C or WL.
Correct Tightening Torque
A loose screw may result in a malfunction. Be sure to tighten each
screw to the proper tightening torque as shown below.
No.
Type Optimum tightening
torque
1 Head mounting screw
0.49 to 0.59 N S m
2 Cover mounting screw
0.49 to 0.59 N S m
3 Allen-head bolt
4.90 to 5.88 N S m
4 Terminal screw
0.49 to 0.59 N S m
5 Switch mounting screw
4.90 to 5.88 N S m
Note: If the head direction has been changed, check the torque of
each screw and make sure that the screws are free of for-
eign substances, and that each screw is tightened to the
proper torque.
1
2
3
4
5
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. C004-E1-9