Datasheet

HL-5000
HL-5000
2
Specifications
Ratings
Rated voltage Non-inductive load Inductive load
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
125 VAC 5 A 1.5 A 0.7 A 3 A 2 A 1 A
250 VAC 5 A 1 A 0.5 A 3 A 1.5 A 0.8 A
12 VDC 5 A 3 A 4 A 3 A
24 VDC 5 A 3 A 4 A 3 A
Inrush current
NC 24 A max.
NO 12 A max.
Note: 1. The above figures are for standard currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
Characteristics
Degree of protection IP65
Life expectancy (see note 3) Mechanical: 10,000,000 operations min. (under rated conditions)
Electrical: See the following Electrical Life Expectancy.
Operating speed 5 mm/s to 0.5 m/s (HL-5000)
Operating frequency Mechanical: 120 operations/min
Electrical: 30 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal part
Rated frequency 50/60 Hz
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Destruction: 1,000 m/s
2
min.
Malfunction:300 m/s
2
min.
Ambient temperature Operating: –5°C to 65°C (with no icing)
Ambient humidity Operating: 95% max.
Weight Approx. 130 to 190 g
Note: 1. The above figures are initial values.
2. The above characteristics may vary depending on the model. For further details, contact your OMRON sales representative.
3. Life expectancy values are calculated at an operating temperature of 5°C to 35°C, and an operating humidity of 40% to 70%. Con-
tact your OMRON sales representative for more detailed information on other operating environments.
Contact Form
NO
NC
(4) (3)
NO
NC
(1) (2)