Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationPulse Counter, 6 Digits, 12 ... 24VDC

CSM_H7GP_DS_E_4_4

Total Counter/Time Counter (DIN 48 x 24)

H7GP

DIN 48 x 24-mm Total Counter/Time Counter

with Easy-to-read Displays and Water and

Oil Resistance Equivalent to IP66

• High-visibility, negative transmissive LCD display with 8.5-mm-

high characters and built-in red LED backlight at low power

consumption.

• IP66 with oil resistance and NEMA 4 protection achieved by

unifying the front with the case and by using oil-resistant parts

and materials.

• Compact (80 mm) body.

• Just change a switch setting for either an NPN or PNP input.

• Supports both external resetting and manual resetting.

• Finger-protection terminal block cover prevents electrical shock

and conforms to VDE0106, Part 100.

• Certified for UL and CSA safety standards.

• Complies with EMC standards (EN 61326) and CE Marking.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■ Model Number Legend

1. Classification

C: Total counter

T: Time counter

2. Supply Voltage

None: 100 to 240 VAC

D: 12 to 24 VDC

3. Case Color of Front Section

None: Light gray (Munsell 5Y7/1)

B: Black

Ordering Information

■ List of Models

Total counter

Time counter

1 2 3

H7GP-@@@

Supply voltage 6-digit total counter

Light gray Black

100 to 240 VAC H7GP-C H7GP-CB

12 to 24 VDC H7GP-CD H7GP-CDB

Supply voltage 6-digit time counter

Light gray Black

100 to 240 VAC H7GP-T H7GP-TB

12 to 24 VDC H7GP-TD H7GP-TDB

Summary of content (7 pages)

PAGE 1
Total Counter/Time Counter (DIN 48 x 24) H7GP CSM_H7GP_DS_E_4_4 DIN 48 x 24-mm Total Counter/Time Counter with Easy-to-read Displays and Water and Oil Resistance Equivalent to IP66 • High-visibility, negative transmissive LCD display with 8.5-mmhigh characters and built-in red LED backlight at low power consumption. • IP66 with oil resistance and NEMA 4 protection achieved by unifying the front with the case and by using oil-resistant parts and materials. • Compact (80 mm) body.
PAGE 2
H7GP Specifications ■ Ratings Item 6-digit total counter H7GP-C 6-digit time counter H7GP-CD H7GP-T H7GP-TD Rated supply voltage 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) External power supply 50 mA at 12 VDC Operating voltage range 85% to 110% of rated supply voltage Power consumption 100 to 240 VAC: 6.5 VA max. 12 to 24 VDC: 0.6 W max.
PAGE 3
H7GP ■ Characteristics Insulation resistance 100 MΩ min.
PAGE 4
H7GP Connections ■ Terminal Arrangement Note: Non-contact input is also available. AC Models H7GP-C External power supply 12 VDC 50 mA max. 100 to 240 VAC Power supply Power supply 5 6 7 1 2 3 Reset input Count input Key protection input 0V H7GP-T External power supply 12 VDC 50 mA max.
PAGE 5
H7GP Operation ■ DIP Switch Settings Set all DIP switches before mounting the Counter to a control panel. All switches are set toward the display panel before shipping.
PAGE 6
H7GP Dimensions Note: All units are in millimeters unless otherwise indicated. H7GP-C H7GP-T Panel Cutouts Panel cutouts are as shown below (according to DIN43700). M3.5 terminal screw 50 min. 5.0 min. 45 +0.6 0 45 +0.6 0 22.2 +0.3 0 22.2 +0.3 0 Terminal cover (provided) Note: 1. The mounting panel thickness should be 1 to 6 mm. 2. Water resistance will be lost if Counters are mounted side-by-side. 3. The terminal screws are M3.5. (Theeffective thread length is 6 mm.) 4.
PAGE 7
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).