Datasheet

Tachometer H7CX-R 51
■ Settings for Advanced Functions
(99.9s)(0.0s)
(999.9s)(0.1s)
(99.999)(1.000)(0.001)
(KP-1) (KP-2) (KP-3) (KP-4) (KP-5)
∼
∼
∼
∼
(See note 2.)(See note 1.)
3s min. 3s min.
Power ON
The characters displayed in reverse video are the initial values.
For details on operations in run mode, refer to page 54.
Settings that cannot be performed with the DIP switch are performed with the operation keys.
Run mode
Function setting mode
Note: 1. If the mode is switched to the function setting mode during operation, operation will
continue.
2. Changes made to settings in function setting mode are enabled for the first time when
the mode is changed to run mode. Also, when settings are changed, the counter is re-
set (measured values initialized and output turned OFF) on returning to run mode.
Key protect
level
(KYPT)
Startup
time
(STMR)
Auto-zero
time
(AUTZ)
Prescale
value
(PSCL)
Decimal
point
position
(DP)
(No decimal
point)
(One digit
after decimal
point)
(Two digits
after decimal
point)
(Three digits
after decimal
point)
Set the decimal point position using the key.
Set the value of each corresponding digit with the key.
Set the value of each corresponding digit with the key.
Set the value of each corresponding digit with the key.
Set the key protect level with the key.