Datasheet

50 Tachometer H7CX-R
Operating Procedures
■ Settings for Basic Operations
Easy Confirmation of Switch Settings Using Indicators
The ON/OFF status of the DIP switch pins can be
confirmed using the front display. For details, refer to page 56.
Note: 1. The characters displayed in reverse video are the default
settings.
2. Changes in DIP switch settings are enabled when the power
is turned ON.
Settings for basic functions are performed with the DIP switch.
1
OFF
ON
234567
8
(Factory setting)
Item OFF ON
1 Not used
2 Counting speed 30 Hz
10 kHz
3 Output mode Refer to the table on the right.
4
5 Average processing Refer to the table on the right.
6
7 Not used
8 NPN/PNP input mode NPN
PNP
Pin 3 Pin 4 Output mode
OFF OFF Upper and lower limit
ON OFF Area
OFF ON Upper limit
ON ON
Lower limit
Pin 5 Pin 6 Average processing
OFF OFF
OFF (no average processing)
ON OFF 2 times
OFF ON 4 times
ON ON 8 times