Datasheet

Tachometer H7CX-R 49
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Tachometer (without Flush Mounting Adapter)
Dimensions with Flush Mounting Adapter
(Adapter and Waterproof Packing Ordered Separately)
Dimensions with Front Connecting Socket
Note: These dimensions vary with the kind of DIN track (reference value).
Accessories (Order Separately)
Note: Refer to page 15 for details.
A
45
+0.6
0
45
+0.6
0
0
A = (48n 2.5)
+1
Panel Cutouts
60 min.
60 min.
15 min.
n side by side mounting
Panel cutouts are as
shown below.
(according to DIN43700).
Note: 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operability, it is
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm
(i.e., so that the panel cutout interval
is at least 60 mm).
3. It is possible to mount counters
side by side, but only in the
direction without the hooks.
If they are mounted side-by-side,
water-resistant specifications
cannot be ensured.
0
With Y92A-48F1 attached.
A = {48n2.5 + (n1) x 4}
+1
0
With Y92A-48 attached.
A = (51n5.5)
+1
48×48
44.8×44.8
72.5
14.4
6
H
L
D
TAC HOM
ETER
H
L
D
H
L
D
TAC HOMETER
H
L
D
(51)
Panel
Y92S-29 (order separately)
Waterproof Packing
Y92F-30 (order separately)
Flush Mounting Adapter
P3GA-11
(order separately)
Back Connecting
Socket
58
48
7.5 98.7
109.7
112
P2CF-11(-E) (order separately)
Front Connecting Socket
H7CX-R11/-R11D1