Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationCounters, Multifunction

Multifunction Preset Counter H7CX-A 17

Operating Procedures

■ Setting Procedure Guide

Setting for Counter Operation

(1-stage/2-stage Counter, Total and Preset Counter, Batch Counter, Dual Counter)

Note: 1. At the time of delivery, the H7CX is set to the 1-stage counter (2-stage counter for H7CX-AW@/-A4W@ models) configuration.

2. Set to output 2 time when using as a 2-stage counter or batch counter.

Setting for Tachometer Operation

Note: At the time of delivery, the H7CX is set to the 2-stage counter (1-stage counter for H7CX-AU@ models) configuration.

12345678

➡

OFF

When Using Basic Settings Only

When Using Settings Other than the Above When Using Advanced Functions

Other Settings Advanced Functions

• Counting speed (30 Hz, 5 kHz)

• Input mode (UP, DOWN)

• Output mode (N, F, C, K-1)

• One-shot output time (0.5 s, 0.05 s)(See note 2.)

• Reset input signal width (20 ms, 1 ms)

• NPN/PNP input mode (NPN, PNP)

Basic Settings

The settings can be performed easily with the DIP switch.

For details on the setting methods, refer to page 18.

All the functions can be set with the operation keys.

For details on the setting methods, refer to page 19.

• Input mode (UP/DOWN A, UP/DOWN B, UP/DOWN C)

• Output mode (R, P, Q, A, K-2, D, L, H)

• One-shot output time (except for 0.5 s and 0.05 s) (See note 2.)

Settings for advanced functions other than the basic

settings above can be performed with the operation keys.

For details on the setting methods, refer to page 19.

• Dual count calculating mode

• Output 1 time (for 2-stage counter)

• Decimal point position

• Prescale value

• Display color

• Output allocation

• Key protect level

12345678

➡

OFF

When Using Basic Settings Only

When Using Advanced Functions

Advanced Functions

• Counting speed (30 Hz, 10 kHz)

• Output mode (HI-LO, AREA, HI-HI, LO-LO)

• Average processing (OFF, 2, 4, 8 times)