Datasheet

H5CX-B@-N
38
Operation in Function Setting Mode
Run mode
Power ON
Function setting mode
*1. If the mode is switched to the function setting mode during operation, operation will continue.
*2. Changes made to settings in function setting mode are enabled for the first time when the mode is changed to run mode.
Also, when settings are changed, the timer is reset (time initialized and output turned OFF).
3 s min.
*2
3 s min.
*1
Settings that cannot be performed with the DIP switch are performed with the operation keys.
• Change to Function Setting Mode.
(Absolute
value setting)
(Forecast
value setting)
Absolute
value setting/
forecast value
setting
Set value
upper limit
Output 1
(OUT1)
ON count
alarm set value
Output 2
(OUT2)
ON count
alarm set value
Output 1
(OUT1)
ON count
monitor value
Output 2
(OUT2)
ON count
monitor value
~
Set the digits for the set values using the
corresponding Key.
(9999 x 1000
times)
(0 x 1000
times)
~
Set the digits for the set values using the
corresponding Key.
Note: The monitor value is only displayed. It cannot be set.
Note: Displayed only in forecast setting mode.
~
Function Setting Mode
Set the digits for the set values using the
corresponding Key.
Set the digits for the set values using the
corresponding Key.
(9999 x 1000
times)
(0 x 1000
times)
Note: The monitor value is only displayed. It cannot be set.
Set the digits for the set values using the
corresponding Key.
~
Forecast
setting upper
limit
(1)
(999999)
~
(1)
(999999)