Datasheet

H5CX-B@-N
36
Nomenclature
Key Protect Level
When the Key-protect Switch is ON, key operations are prohibited
according to the settings for DIP switch pins 6 to 8, thus preventing
setting errors.
The Key-protect Switch can be turned ON and OFF while the power
is ON.
The Key Protection Indicator is lit orange when the Key-protect Switch
is ON.
If the key protect switch is ON, you will not be able to switch to
Function Setting Mode.
Dimensions (unit: mm)
Digital Timers
Accessories (Order Separately)
Refer to page 12 for details.
OFF
(Disabled)
ON
(Enabled)
(Default setting)
11
12
10mm
6mm
1
2
3
8
9
4
6
7
5
10
Display Section
3. Reset Indicator
(orange)
1. Key Protection Indicator (orange)
2. Control Output Indicator (orange)
4. Present Value Display (red)
Character height: 10 mm
7. Set Value 1, 2 Indicator (green)
If the time range is 0.0 min or 0.0 h, the decimal
point flashes to indicate timing operation.
6. Set Value (green)
Character height: 6 mm
5. Time Unit Indicators (green)
Lit when the reset input or Reset Key is ON.
Lit when the reset input or Reset Key is ON.
Forecast value setting
Operation Key
8. Mode Key
9. Reset Key
Switches
11. Key-protect Switch
12. DIP Switch
First digitSixth digit
Absolute value setting
(Changes modes and setting items)
Resets present value and output.
Character Size
for Present
Value Display
Character Size
for Set Value
Display
Forecast output ON: OUT 1 is lit.
Control output ON: OUT 2 is lit.
Control output 1 ON: OUT 1 is lit.
Control output 2 ON: OUT 2 is lit.
10. Up Keys 1 to 6
OFF
ON
12345678
Digital Timers
H5CX-BWSD-N (Flush Mounting Models)
44.8×44.8
59
6
48×48
Note: M3.5 terminal screw (effective length: 6 mm)
Panel Cutouts
Panel cutouts areas shown below. (according
to DIN43700)
Note: 1. The mounting panel thickness should
be 1 to 5 mm.
2. To allow easier operation, it is
recommended that Adapters be
mounted so that the gap between
sides with hooks is at least 15 mm
(i.e., with the panel cutouts separated
by at least 60 mm).
3. It is possible to mount Timers side by
side, but only in the direction without
the hooks. However, if Timers are
mounted side by side, water
resistance will be lost.
60 min.
60 min.
45
+0.6
–0
45
+0.6
–0
15 min.
n side by side mounting
A
A= (48n–2.5)
+1
–0
With Y92A-48F1 attached.
A={48n–2.5+(n–1)×4}
+1
–0
With Y92A-48 attached.
A= (51n–5.5)
+1
–0
Dimensions with Flush Mounting Adapter
H5CX-BWSD-N (Provided with Adapter and Waterproof Packing)
58
48
7.5 57.5
(51)
Y92F-30 (provided)
Flush Mounting Adapter
PanelY92S-29 (provided)
Waterproof Packing