Datasheet

H3DK-F
14
Dimensions (Unit: mm)
■ Timers
■ Track Mounting Products (Sold Separately)
Refer to page 28 for details.
Operating Procedures
■ Basic Operation
■ Timing Charts
Note 1. The reset time is 0.1 s min.
Note 2. When power is supplied in flicker ON start mode, the OFF indicator lights momentarily. This, however, has no effect on the performance of the Timer.
89.4
100
88.2
22.5
69.1
79 65.6 52
4
H3DK-F
● Setting the Time Ranges
Use the ON time range switch to set the
ON time range and the OFF time range
switch to set the OFF time range. Turn
the switches with a flat-blade or Phillips
screwdriver.
● Setting an ON Start or OFF Start
The ON/OFF start switch can be used to
switch between ON-start and OFF-start
operation.
● Setting the Times
Use the ON time setting dial and the
OFF time setting dial to set the ON time
and OFF time.
Setting the Time Ranges
OFF time range
switch
ON time range
switch
Setting the ON/OFF Start Switch
ON/OFF start
switch
Setting the Times
ON time setting dial
OFF time setting dial
Flicker OFF start Flicker ON start
tON
tOFF tOFFtOFFtOFF
tON
tON: ON set time
t
OFF: OFF set time
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Power (A1 and A2)
ON indicator (15 and 18)
OFF indicator (15 and 16)
0.1 s min.
Output (15 and 18)
tOFF tOFF
tONtONtONtON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
t
ON: ON set time
t
OFF: OFF set time
Power (A1 and A2)
ON indicator (15 and 18)
OFF indicator (15 and 16)
0.1 s min.
Output (15 and 18)