Datasheet

Standalone Controller
Safety controllers
13
G9SP configuration tool
Ethernet
Serial RS232C
I/O wiring
CP1L PLC
G9SP
Standalone safety controller
Machine control
Safety control
Safety light
curtain
Safety door
switch
Contactor ContactorEmergency
stop
Control system integration
Safety - I/O-status becomes transparent
The standalone Safety Controller offers diagnosis information in 3 ways:
1) via parallel wiring
2) via serial RS232C interface (option)
3) via Ethernet interface (option).
Information of all safety in- and outputs on the standard control system ensure minimum downtime of the machine.
Easy setup and configuration is provided by a setup wizard
supporting the hardware selection.
User-defined function blocks
Approved configuration elements such as a tested door
monitoring solution can be easily stored as a user defined
function block and re-used in future projects. This minimises
the time it takes to create a new system configuration.
Integrated Simulator
All functions can be tested and simulated in the Configuration
Tool, so there’s no unnecessary additional workload for the
engineer. In addition, on-line diagnosis reduces debug time
to a minimum during implementation in the machine control
system.
Knowledge-building
Existing configurations are the basis for new projects. The
G9SP Configuration Tool supports re-use of existing and
proven know-how in safety control, as well as user-defined
function blocks. Which means no more repetition of effort,
instead a growing library of safety solutions.
Designing Reusing
Simulating Packaging